Download - Dönges

Personal equipment
UK helmet clips
Helmet clip for Schuberth
F100/F110/F120/
F200/F210/F220
1
Personal equipment
Helmet holder for screwing into thread in helmet. A
circlip and a rubber ring allow the height of the lamp
to be adjusted by simply twisting. The lamp remains in
position, even if rapid movements are made with the
head.
Order no.
Weight g
219180 35
Helmet clip for Rosenbauer
Heros
extremely sturdy helmet holder made from stainless
steel or plastic, specially for Rosenbauer Heros helmets.
Secured to lower edge of helmet. The stainless steel
bracket also lies against the helmet shell and therefore
provides even more stability for the lamp. The height of
the lamp is adjusted by simply twisting.
Order no.
Weight g
219185 65
Helmet clip for Gallet F1SA
Extremely sturdy helmet holder made from stainless
steel or plastic, specially for Gallet A2 helmets. Secured
to existing screw. The lamp is ideally positioned at eye
level, meaning that the beam of light is always pointing
in the right direction. The height of the lamp is adjusted
by simply twisting.
Order no.
Weight g
219190 60
Helmet clip for Gallet F1SA
Plastic helmet holder for securing to edge of helmet
on left side. The lamp can be simply removed from
or re-attached to the mounting rail at the edge of
the helmet using the plastic holder. The height of
the lamp is adjusted by simply twisting.
Order no.
Weight g
219210 60
Quality since 1903
36
www.doenges-rs.de