Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
General Sanding<br />
Contour Sanding<br />
For general wood sanding, position and secure<br />
table, turn the machine on, and slowly feed your<br />
workpiece into the belt or disc. For disc sanding,<br />
note the direction of the disc rotation and be sure<br />
to feed your workpiece into the disc’s downward<br />
spin. Also, be sure to keep the work table about<br />
1<br />
⁄16" away from the belt or disc.<br />
Remove platen and move Small Upper Idler<br />
Roller rearward so the workpiece will not be accidentally<br />
forced against it. Slowly feed the workpiece<br />
into the belt; the belt will follow the contour<br />
of the workpiece. See Figure 20.<br />
Figure 20. Contour sanding.<br />
-18- <strong>G1013</strong> Combination Sander