You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
produce and produce again… always to a faultless<br />
level of quality. The partnership mentioned earlier is<br />
based on this parameter: the customer knows the<br />
quality of the parts delivered is excellent when the<br />
order is placed.<br />
«For Essor, it is a point that needs analysing continuously.<br />
Our parts are transported directly onto<br />
assembly lines and we know that we simply have to<br />
deliver top quality,» continues Marc Rossé.<br />
Constraints also come from the change in materials.<br />
Although the majority of parts were made in brass a<br />
few years ago, this material only represents 20% of<br />
machined parts at Essor today. Materials have<br />
become tougher and more demanding for the<br />
machine tools.<br />
Tools wear down, so this is where tool wear management<br />
makes all the difference. By using control data<br />
concerning tool drift, it is easy to programme automatic<br />
corrections in the NC. When every minute<br />
counts, being able to let a machine work unsupervised<br />
all night, for example, while being assured that<br />
tool wear has been compensated for is one less thing<br />
to worry about! Even if the Rossé brothers tell us<br />
they are not kept awake at night, the entrepreneurs’<br />
responsibility is a heavy charge to bear. So, thanks to<br />
this device, <strong>Tornos</strong> can offer them extra “production<br />
minutes”, but also more peace of mind, which is<br />
maybe also an El Dorado!<br />
ESSOR IN FIGURES<br />
Year company founded: 1912<br />
Employees: 50<br />
Machine park: 100<br />
DECO park: 12<br />
Average number of start ups:<br />
one per day<br />
Certification: ISO 9001:2000<br />
Key words:<br />
precision, passion<br />
Contact:<br />
ESSOR – Rossé & Affolter SA<br />
CH-2738 Court (Switzerland)<br />
Tel. +41 (0)32 497 71 40<br />
Fax +41 (0)32 497 71 50<br />
www.essor.ch<br />
info@essor.ch<br />
For further information on the tool life management<br />
system, contact <strong>Tornos</strong>:<br />
Mr Van An Ly<br />
Ly.v@tornos.com ++41 32 494 47 28<br />
Mr Marc Wyss<br />
Wyss.m@tornos.com ++41 32 494 46 84<br />
04 / 08<br />
decomagazine 39