AM MAGAZINE SHELL - Australian Automotive Aftermarket Magazine

4WD
FIT IT TO THE GREAT WALL
ECB has released its range of bullbars to fit the Great Wall V240.
Intending to use your Great Wall
V240 as a serious work vehicle or
4wd? Ensure your vehcile is
sufficently protected by adding
serious frontal protection, courtesy
of the ECB Arc Bar designed
speicially for the Great Wall V240.
Manufactured from high tensile,
structural grade alloys and
featuring fully gusseted, 63mm
headlight tubes the ECB Arc Bar
provides superior protection for the
vulnerable bumper, grille and
headlights. A tapered, one-piece
bumper incorporates a full-width, braced lower protection skirt providing exemplary
protection for the delicate mechanics and cooling systems.
The ECB Arc Bar is fitted to the Great Wall V240 by the bumper-cut technique, allowing
the sturdiest and best looking fit possible. This bumper-cut technique also increases the
approach angle of the vehicle, allowing superior navigation of rugged terrain. Standard
features of the ECB Arc Bar for the Great Wall V240 include, spotlight mounting provisions,
an aerial tab, parklight/indicator combinations, air directional cooling vents and ECB Driving
Lights. All ECB products are ADR and air bag compliant and protected by the ECB Lifetime
Warranty, for total piece of mind.
TYPE 8 BAR
For significant bumper, grille and headlight protection look no further than the Type 8
Bar specifically designed for the Great Wall V240. Manufactured from high tensile, structural
grade alloys and complete with a 63mm centre tube the tubular construction of the Type 8
Bar is designed to contour perfectly to the distinct lines of the V240, providing both excellent
protection and good looks. Standard features of the Type 8 Bar include driving light mounting
points and the ECB lifetime Guarantee, for total peace of mind.
63MM SERIES 2 NUDGE BAR
Sports styled for superior looks, the 63mm Series 2 Nudge Bar is the perfect frontal
protection equipment for a city-bound Great Wall V240. Designed and built in Australia, for
our harsh conditions, the 63mm Series 2 Nudge Bar will never rust or corrode. Manufactured
from high tensile, structural grade alloys the 63mm Series 2 Nudge Bar features far superior
strength compared to cheap, foreign-made stainless steel competitors; without the added
weight of steel-based nudge bars. Standard features of the 63mm Series 2 Nudge Bar
include spotlight mounting tabs and the ECB Lifetime Guarantee.
76MM NUDGE BAR
For sporty, sleekly styled impact protection nothing beats the 76mm ECB Nudge Bar.
Manufactured in Australia, for the harshest conditions, this 76mm Nudge Bar will never
corrode or rust. Constructed using only high tensile, structural grade alloys the 76mm Nudge
Bar provides premium strength compared to cheap, foreign-made, stainless steel
competitors; without the extra weight of steel-based nudge bars.
Standard features of the 76mm Nudge Bar include spotlight mounting tabs and the ECB
Lifetime Guarantee.
TRADE RACKS
These stylish, yet highly functional trade racks are a must have for any Great Wall V240
used as a heavy-duty work vehicle. Manufactured from construction grade alloys and
featuring a 76mm diameter these trade racks are incredibly strong and resiliant, enabling
you to safely and efficiently increase the carrying capacity of your vehicle; without adding
the signficant extra weight of steel-based trade racks.
If you require more information call ECB 07 3897 5700.
ARB AIR CHUCKS
RELEASED
ARB has released its range of air chucks
purpose-built to suit ARB's award winning range of air
compressors. The result of substantial research and
testing, the new range includes two durable air chucks
and an inflator with gauge designed to add even
greater versatility to your compressor.
A common irritant among owners of air compressors
is the guesswork required during inflation. The ARB
inflator with gauge addresses this issue by combining a
clip on chuck with a quality, in-line gauge. Featuring a
fully geared precision movement and an easy to read
dial with dual scale PSI/Bar increments, the ARB
Inflator is designed for quick and accurate tyre inflation.
The inflator also incorporates a protective rubber gauge
guard and quality bronze bourdon tube design for added
durability. A 330mm stainless braided flexible hose
allows easy use of the gauge at any angle, while an air
bleed button is included for controlled deflation.
For applications where a long reach is required, such
as with Bead locks, split rims and dual truck rims, the
ARB push-on air chuck makes access simple and stress
free. Featuring a dual chuck for valve access on split
rims the push-on chuck is nickel plated for corrosion
protection and incorporates an easy-grip rubber sleeve
handle.
And for increased functionality for your air
compressor, ARB has also released an air chuck with
clip for applications where an angled chuck is required,
including small wheels and motorcycle rims. The ARB
air chuck with clip features heavy-duty nickel-plated
brass and steel construction for long lasting reliability.
All three products are designed to suit ARB
compressor lines and incorporate an internal air shut
off valve. Coming with a two year warranty, each air
chuck also features the US standard male air fitting, or
can alternatively have the fitting removed and then
retrofitted with any air fitting using 1/4 NPT thread.
For more details on these products and ARB's range of
portable and vehicle mounted air compressors, visit
www.arb.com.au or contact your nearest ARB store or
stockist.
AU T O M O T I V E A F T E R M A R K E T M AG A Z I N E D E C E M B E R 2 0 0 9 25