1969 Camaro - Classic Auto Air

11
Preparing the TEMP EZ Cable Integrator for installation: First place a
included cable clip over the ends of the EZ Integrator (as shown
below). Prepare both integrators the same way. It is very important
that you place the cable clips over the end of the intergrators very
securly and evenly. Place the cable clip over the end, press it firmly
into place (using needle-nose pliers is recommended).
Next, attach the TEMP EZ Cable Integrator to the control head as
show to the right. The loop ends of the integrator wires will be
secured with the a push nut.
www classicautoair com • 866 435 7801