11.11.2014 Views

EM3800SX•EM5000SX•EM6500SX - Geotech Environmental ...

EM3800SX•EM5000SX•EM6500SX - Geotech Environmental ...

EM3800SX•EM5000SX•EM6500SX - Geotech Environmental ...

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Oil Alert System<br />

The Oil Alert system is designed to prevent engine damage caused<br />

by an insufficient amount of oil in the crankcase. Before the oil level in<br />

the crankcase can fall below a safe limit, the Oil Alert system will<br />

automatically stop the engine (the engine switch will remain in the ON<br />

position). The Oil Alert system should not take the place of checking<br />

the oil level before each use.<br />

If the engine stops and will not restart, check the engine oil level (see<br />

page 30)<br />

before troubleshooting in other areas.<br />

Auto Throttle System<br />

The Auto Throttle system automatically reduces engine speed when<br />

all loads are turned off or disconnected. When appliances are turned<br />

on or reconnected, the engine returns to the rated speed.<br />

Switch Position<br />

AUTO: Recommended to minimize fuel consumption and further<br />

reduce noise levels when no load is applied to the generator.<br />

OFF: The Auto Throttle system does not operate.<br />

Recommended to minimize warm-up time when the<br />

generator is started and when starting a load with large startup<br />

power equipments.<br />

AUTO THROTTLE SWITCH<br />

OFF<br />

OFF<br />

ON<br />

ON<br />

14

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!