instruction book - Janome

6 7
16
19
6
Remove the fabric and place a pin just before the
bartack at each end to prevent cutting bartacks.
18
7
Cut the opening with the seam ripper. Use an awl to
open the keyhole buttonhole.
17
16
17
18
Pin
Seam ripper
Awl
8
8
After the buttonhole sewing is finished, push the
buttonhole lever upward as far as it will go.
19
19
Buttonhole lever
Double layer buttonhole
To make a solid and sturdy buttonhole, sew another layer
of buttonhole over the previous one.
After the buttonhole is finished, simply depress the foot
control again.
Do not raise the foot or reselect the pattern.
The machine will sew another buttonhole in the following
order and stop automatically:
Straight stitching in reverse to go back to the starting
point.
Front bartack and left row.
Right row.
Back bartack and locking stitches at the end.
28