instruction book - Janome

1
2
1
Cleaning Hook Race and Feed Dog
WARNING: Raise the presser foot and needle, and then
unplug the machine.
DO NOT dismantle the machine other than
as explained in this section.
2
3
1
Remove the needle and presser foot.
Remove the two setscrews and unhook the hook to
remove the needle plate.
4
2
1 Needle plate
2 Setscrew
3 Hook
Take out the bobbin and bobbin holder.
3
4
Bobbin holder
3
Clean the bobbin holder with the lint brush and soft dry
cloth.
4
5
4
Brush out dust and lint from the feed dog and clean
the hook race with the lint brush.
5
Feed dog
5
5
Wipe inside of the hook race with a dry cloth.
6
Hook race
NOTE: You may use vacuum cleaner.
6
1
Replacing bobbin holder and needle plate
1
Insert the bobbin holder.
2
2
Make sure to fit the knob next to the stopper in the
hook race.
7
7
8
Stopper
Knob
8
3
2
3
Insert the bobbin and attach the needle plate.
Tighten the setscrews firmly.
3
NOTE: After cleaning the machine, attach the needle
and presser foot.
47