00 Contents - Hilti Svenska AB

More documents

Recommendations

Info

Tips for users DX fastenings on steel Fault Nail head penetrates through material fastened (metal sheet) Damaged nail head ■ Too much driving power Cause Possible remedial measures ■ Too much driving power ■ Reduce power setting ■ Use lighter cartridge ■ Use nail with Top Hat ■ Use nail with washer e.g. X-U ...S12 ■ Wrong piston used ■ Worn-out piston ■ Reduce power setting ■ Use lighter cartridge ■ Check nail-piston-combination ■ Change piston Wrong pistons can cause all above faults: Match pistons to nails! Fastener Piston Piston head X-U, X-DNI, X-EDNI, X-ZF, X-CF, DAK16 Use piston X-460-P8 X-AL-H Use piston X-460-P8AL 1.88 11 / 2007
Approval Listing Summary of approvals and listings of DF-fasteners and DF-fastening systems Techno- Seg- Approval logy ment Product Country Application ABS 01-HS156800A/2-PDA DX PS X-EDNI, EDS, X-DNI, DS, X-ALH, Int. Fastenings to steel ENPH2, ENP2K, X-ENP-19, X-EDN, X-EDNK, X-EM, X-EW, X-EF ABS 01-HS156800B/1-PDA DX PS X-CR, X-CRM, X-CRW, X-FCM-R, Int. Fastenings to steel X-FCP-R ABS 03-HS 369456/1-PDA DX PS X-BT Int. Fastenings to steel, Off-Shore ABS 03-HS 369864-PDA DX PS X-BT Int. Fastenings to steel, Shipbuilding BUTgb ATG 03/1824 DX SM NPH2, ENP2, ENPH2, ENKK, B Metal Deck EDNK, ENP2K COLA RR 25646 DX BC X-EDNI, EW6, EDS, EW10, X-DNI, USA Fastenings to steel DS, ESD, X-ZF, X-CR, X-ALH, X-CF, and concrete X-DW, X-DAK, W6, W10 COLA RR 25651 DX IF CC27ZF, CC27ALH, CC27ALH-Kwik USA Ceiling Hanger COLA RR 25675 DX IF X-GN, X-EGN USA Dry-wall COLA RR 25662 DX BC X-U USA Fastenings to steel and concrete COLA RR 24836 DX SM ENP2, ENP3 Cal. Metal Deck CSTB AT 1+3/03-801 DX ME X-EKB, X-ECH, X-EFC, X-HS, X-JH F Electrical fastenings CSTB Pass0087 SF SM S-IT 01C4.8xL + S-IW4.9 AZ80x40 F MEFAWAME CSTB Pass0088 SF SM S-IT 01C4.8xL + S-IW4.9 AZ40x40 F MEFAWAME CSTB Pass0089 SF SM S-IS 01C4.8xL + S-IW5.6 AZ80x40 F MEFAWAME CSTB Pass0090 SF SM S-IS 01C4.8xL + S-IW5.6 AZ64x64 F MEFAWAME CSTB Pass0091 SF SM S-IS 01C4.8xL + S-IW5.6 AZ40 F MEFAWAME DIBt Z-14.1-4 SF SM S-MD, S-MP D Metal Deck DIBt Z-14.4-407 SF SM S-CD, S-CDW D Sandwich Panel DIBt Z-21.7-1512 DX SM X-CR M8, X-CR48 (DX-Kwik) D Facade DIBt Z-21.7-670 DX IF M8H, X-CR M8, X-DKH48, D Ceiling Hanger X-CR48 (DX-Kwik) DIBt Z-26.4-46 DX SM X-HVB D Shear Connection DIBt Z-14.4-456 DX SM X-CR14 D Glas facade DIBt Z-21.2-1763 DX BC SX-FV D ETICS-Verwendungs.zul. DIBt Z-33.9-652 DX BC XI-FV D ETICS-Verwendungs.zul. ETA-03/0004-English DX BC XI-FV EEA ETICS ETA-03/0004-German DX BC XI-FV EEA ETICS ETA-03/0005-English DX BC SX-FV EEA ETICS ETA-03/0005-German DX BC SX-FV EEA ETICS ETA-04/0063-English DX SM ENP2-21, ENPH2-21 EEA Metal Deck ETA-04/0063-German DX SM ENP2-21, ENPH2-21 EEA Metal Deck ETA-04/0101-English DX SM X-ENP-19 EEA Metal Deck ETA-04/0101-German DX SM X-ENP-19 EEA Metal Deck ETA-04/0101-French DX SM X-ENP-19 EEA Metal Deck FM DX ME W10, EW10 USA Sprinkler FM SF SM S-MD 10, S-MD 12 USA Sidelap screws FM 0W8A6.AM DX SM X-EDN-19, X-EDNK-22 USA Metal Deck FM 2Y6A7.AM DX SM X-EDN-19, X-EDNK-22 USA Metal Deck FM 3021719 DX SM X-ENP-19 USA Metal Deck FM DX SM ENP2-21, ENPH2-21 USA Metal Deck FM SF SM Kwik-Pro Screws USA Roofing FM DX ME X-EW6H, X-EW10H USA Sprinkler Germanischer Lloyd DX PS X-BT Int. Fastenings to steel IBMB 003/03 + 031/03 DX IF X-GN, X-GHP, X-DW D Fire Rating 11 / 2007 1.89
Page 1 and 2:
Principles and technique Introducti
Page 3 and 4:
Introduction Introduction 1 1.1 Def
Page 5 and 6:
? + ? + = 2.4 kN + + = 2.4 kN A com
Page 7 and 8:
Hilti direct fastening systems are
Page 9 and 10:
The direct fastening system Introdu
Page 11 and 12:
2.1 Fasteners The direct fastening
Page 13 and 14:
Stainless steel fasteners Hilti int
Page 15 and 16:
Hilti Tools All Hilti tools supplie
Page 17 and 18:
The direct fastening system DIN 726
Page 19 and 20:
Health and safety Introduction 1 Th
Page 21 and 22:
Drop-firing safety The drop firing
Page 23 and 24:
ystanders. Safety tests with carton
Page 25 and 26:
Quality of installation The use of
Page 27 and 28:
Corrosion Introduction 1 The direct
Page 29 and 30:
2. Contact corrosion Corrosion is a
Page 31 and 32:
Hilti X-CR / X-BT stainless steel f
Page 33 and 34:
Steel base material Introduction 1
Page 35 and 36:
Fusing (welding) Complete fusing of
Page 37 and 38: Guide values for the depth of penet
Page 39 and 40: Steel base material Surface of the
Page 41 and 42: Steel base material Compressive str
Page 43 and 44: 5.5 Thin steel base material Steel
Page 45 and 46: Failure of the base steel If the th
Page 47 and 48: Pull-over test specimen at test beg
Page 49 and 50: X-CRM8-15-12 (stainless steel faste
Page 51 and 52: Steel base material 5.7 Effect of f
Page 53 and 54: 5.9 Effect on the fatigue strength
Page 55 and 56: Concrete base material Introduction
Page 57 and 58: Clamping The compressibility of con
Page 59 and 60: Concrete parameter The concrete par
Page 61 and 62: Edge distance and fastener spacing
Page 63 and 64: Masonry base material Introduction
Page 65 and 66: Temperature effects Introduction 1
Page 67 and 68: Base steel: S355K2G3 h = 25 mm fy =
Page 69 and 70: 8.3 Fire rating of fastenings to st
Page 71 and 72: Temperature effects 8.4 Fire rating
Page 73 and 74: Design concepts Introduction 1 The
Page 75 and 76: The characteristic strength is defi
Page 77 and 78: Determination of technical data Int
Page 79 and 80: 10.2 Profile sheet fastenings Deter
Page 81 and 82: Calculation method The calculation
Page 83 and 84: Determination of technical data The
Page 85 and 86: DX fastenings on concrete Fault Fas
Page 87: DX fastenings on steel Fault Nail d
show all

00 Contents - Hilti Svenska AB

Create successful ePaper yourself

Delete template?

Save as template?