HP-UX Virtual Partitions Administrator Guide - Hewlett Packard

More documents

Recommendations

Info

Table 5-2 Virtual Partition States (continued) State shut down crash hung N/A Description The virtual partition is shutting down gracefully. Once the partition is shutdown, the state moves to down. The virtual partition is down. vparstatus Output Examples The virtual partition is crashing because of a panic (HPMC, TOC, etc.). Once the partition has completed crashing, the state moves to down. The virtual partition is not responding. The virtual partition is in a database file that is not active, so it has no state. The database file can be inactive because either the system is in standalone mode (the vPars Monitor is not running) or the database file acted upon is an alternate database file that is not in vPars Monitor memory. The next few pages show examples of using the vparstatus command: • “vparstatus: Summary Information” (page 143) • “vparstatus: Verbose Information” (page 144) • “vparstatus: Available Resources” (page 146) • “vparstatus: Pending Migrating CPUs Operations” (page 151) • “vparstatus: Dual-Core CPUs” (page 150) • “vparstatus: CPU Information on vPars A.04/A.05” (page 148) • “vparstatus: Pending Migrating Memory Operations” (page 152) • “vparstatus: Pending nPartition Reboot for Reconfiguration” (page 154) • “vparstatus: vPars Monitor and Database Information” (page 155) NOTE: • Actual vparstatus output differs from version to version of vPars. Depending on your version and system, the output shown below may differ. For detailed usage, syntax, and information, see the manpage vparstatus(1M) on your vPars system. • The kernel path shown in the vparstatus output is the kernel path set in the vPars database. This may differ from the actual kernel in use. 142 vPars Monitor and Shell Commands
vparstatus: Summary Information Use vparstatus with no options. Examples • vPars A.03.xx on a rp7400: winona1# vparstatus [Virtual Partition] Boot Virtual Partition Name State Attributes Kernel Path Opts ============================== ===== ========== ========================= ===== winona1 Up Dyn,Auto /stand/vmunix winona2 Up Dyn,Auto /stand/vmunix winona3 Up Dyn,Auto /stand/vmunix [Virtual Partition Resource Summary] CPU Num Memory (MB) CPU Bound/ IO # Ranges/ Virtual Partition Name Min/Max Unbound devs Total MB Total MB ============================== ================ ==== ==================== winona1 2/ 8 2 0 2 0/ 0 1024 winona2 2/ 8 2 1 2 0/ 0 1280 winona3 1/ 8 1 0 2 0/ 0 1280 • vPars A.04.xx/A.05.xx on an Integrity Superdome: thurman24# vparstatus [Virtual Partition] Boot Virtual Partition Name State Attributes Kernel Path Opts ============================== ===== ============ ======================= ===== thurman24 Up Dyn,Auto,Nsr /stand/vmunix thurman25 Up Dyn,Auto,Nsr /stand/vmunix thurman26 Up Dyn,Auto,Nsr /stand/vmunix thurman27 Up Dyn,Auto,Nsr /stand/vmunix [Virtual Partition Resource Summary] CPU Num Num Memory Granularity Virtual Partition Name Min/Max CPUs IO ILM CLM ============================== ======= ==== ==== ========== ========== thurman24 1/ 28 1 3 128 128 thurman25 1/ 28 6 2 128 128 thurman26 1/ 28 3 3 128 128 thurman27 1/ 28 3 4 128 128 Memory (MB) ILM CLM # User # User Virtual Partition Name Ranges/MB Total MB Ranges/MB Total MB ============================== ====================== ====================== thurman24 0/ 0 1024 0/ 0 0 thurman25 1/1024 1024 0/ 0 0 thurman26 0/ 0 1024 1/ 256 256 thurman27 1/ 512 1024 1/ 768 1024 Commands: Displaying vPars Monitor and Resource Information (vparstatus) 143
Page 1 and 2:
HP-UX Virtual Partitions Administra
Page 3 and 4:
Table of Contents About This Docume
Page 5 and 6:
Ignite-UX Cookbook.................
Page 7 and 8:
Other Boot Modes...................
Page 9 and 10:
The Goal...........................
Page 11 and 12:
Recovering All the Virtual Partitio
Page 13 and 14:
List of Figures 1-1 vPars Conceptua
Page 15:
About This Document Intended Audien
Page 18 and 19:
NOTE: Definitions This document use
Page 20 and 21:
20 Introduction Therefore a single
Page 22 and 23:
22 Introduction — /opt/ignite/boo
Page 24 and 25:
24 Introduction vPars partition dat
Page 26 and 27:
NOTE: In certain situations when us
Page 28 and 29:
Figure 2-2 Software Stack of Server
Page 30 and 31:
As a preventive action, you can bac
Page 32 and 33:
Virtual Consoles HP-UX servers have
Page 34 and 35:
NOTE: Note the following when using
Page 36 and 37:
Security only one particular virtua
Page 38 and 39:
new EFI device path. However, firmw
Page 40 and 41:
Table 2-1 PA-RISC and Integrity Dif
Page 42 and 43:
Table 2-2 Differences Among vPars V
Page 44 and 45:
Table 2-6 CPU Rules from A.03.xx to
Page 47 and 48:
3 Planning Your System for Virtual
Page 49 and 50:
0/0/1/1/0/5/0 lan HP A5506B PCI 10/
Page 51 and 52:
where 0/12 and 0/13 are the cell/CP
Page 53 and 54:
The ioscan output for the example n
Page 55 and 56:
0/10 ba Local PCI Bus Adapter (782)
Page 57 and 58:
Choosing the Boot and Lan Paths Aut
Page 59 and 60:
• The vPars A.04.05 Monitor or la
Page 61 and 62:
The following features can be execu
Page 63 and 64:
keira1 B.11.31 Up keira2 B.11.23 Up
Page 65 and 66:
Features Summary The following tabl
Page 67 and 68:
Figure 3-1 nPars with Resources Ali
Page 69:
Therefore, you can notice that the
Page 72 and 73:
Cautions For information on using t
Page 74 and 75:
3. Answer “y” (yes) to indicate
Page 76 and 77:
vPars-related Bundles (A.03.xx and
Page 78 and 79:
Ignite-UX, the LAN, the LAN card, a
Page 80 and 81:
Updating from vPars A.04.xx to A.05
Page 82 and 83:
Example: keira1# vparstatus [Virtua
Page 84 and 85:
keira1 # vparmodify -p keira3 -B au
Page 86 and 87:
Overview of the Mixed HP-UX 11i v1/
Page 88 and 89:
— Wait for the vPars A.03.05 upda
Page 90 and 91:
HPUX11i-OE-MC Mission Critical OE W
Page 92 and 93: 4. If gWLM is in use, disable (unde
Page 94 and 95: NOTE: If you are updating to vPars
Page 96 and 97: Monitor the installation progress u
Page 98 and 99: Migrating from vPars A.03.xx to Mix
Page 100 and 101: Updating from vPars A.04.xx to Mixe
Page 102 and 103: T1335BC vPars A.04.xx bundle Note t
Page 104 and 105: The nPartition number is 0. Record
Page 106 and 107: d. Once the PRI path has been succe
Page 108 and 109: The Steps For information on the ty
Page 110 and 111: NOTE: If the BOOT and ALTBOOT disks
Page 112 and 113: BCH> bo pri interact with IPL: y IS
Page 114 and 115: NOTE: If you have previously applie
Page 116 and 117: Upgrading HP 9000 Servers from the
Page 118 and 119: Upgrading Backplanes from PCI to PC
Page 120 and 121: # vparboot -p winona2 -I ww.xx.yy.z
Page 122 and 123: # vparboot -p -I [ [-d dbprofile_n
Page 124 and 125: If you are at the console of winona
Page 126 and 127: Notes on Examples in this Chapter S
Page 128 and 129: • To set the mode to vPars and th
Page 130 and 131: CAUTION: • When you set the mode
Page 132 and 133: For more information on vparefiutil
Page 134 and 135: # setboot -a mirror_disk_hw_path
Page 136 and 137: Example: — If you have a backup c
Page 138 and 139: Example: — To display the file /s
Page 140 and 141: Log File Location and Log Format Th
Page 144 and 145: vparstatus: Verbose Information Use
Page 146 and 147: vparstatus: Available Resources Use
Page 148 and 149: vparstatus: CPU Information on vPar
Page 150 and 151: vparstatus: Dual-Core CPUs You can
Page 152 and 153: vparstatus: Pending Migrating Memor
Page 154 and 155: vparstatus: Pending nPartition Rebo
Page 156 and 157: use the corresponding vparcreate co
Page 158 and 159: Booting a Virtual Partition To boot
Page 160 and 161: When to Shutdown All Virtual Partit
Page 162 and 163: NOTE: • To modify stable storage,
Page 164 and 165: Setting the Primary or Alternate Bo
Page 166 and 167: . . . [IO Details] 0.0.6 0.0.6.0.0.
Page 168 and 169: On a vPars server, to get the same
Page 170 and 171: NOTE: For Superdome and other nPart
Page 172 and 173: From HP-UX shell prompt From the ru
Page 174 and 175: 5. Import the root volume group (vg
Page 176 and 177: Memory I/O Paths (LBAs) Boot Path L
Page 178 and 179: 178
Page 180 and 181: • “I/O: Concepts and Functional
Page 182 and 183: Figure 6-6 vPars Allocates at LBA L
Page 184 and 185: I/O: Allocation Notes When planning
Page 186 and 187: Memory: Concepts and Functionality
Page 188 and 189: NOTE: The Default is :base. When ne
Page 190 and 191: Memory: Assigning (Adding) or Delet
Page 192 and 193:
Memory: Assigning (Adding) Or Delet
Page 194 and 195:
Memory: Converting Base Memory to F
Page 196 and 197:
Memory: Granularity Issues (Integri
Page 198 and 199:
vparcreate vparenv rather than vpar
Page 200 and 201:
Memory: Setting the Granularity Val
Page 202 and 203:
— “CPU: Specifying Min and Max
Page 204 and 205:
vparcreate NOTE: CPU deletion fails
Page 206 and 207:
CPU: Adding or Deleting by CLP (Cel
Page 208 and 209:
— keira1# vparmodify -p keira2 -a
Page 210 and 211:
Figure 6-7 Using Partition Manager
Page 212 and 213:
setboot -m on|off For more informat
Page 214 and 215:
NOTE: On a vPars system, when a vir
Page 216 and 217:
The vparstatus output shows that a
Page 218 and 219:
NOTE: Regarding syntax and how vPar
Page 220 and 221:
Examples • To add all hardware us
Page 222 and 223:
different meanings depending upon t
Page 224 and 225:
NOTE: Assigning ILM or CLM memory b
Page 226 and 227:
Memory: Granularity Concepts Granul
Page 228 and 229:
Granularity Memory is normally assi
Page 230 and 231:
Example 2 If the total physical mem
Page 232 and 233:
When using this method, note that t
Page 234 and 235:
Memory: Allocation Notes CPU • Th
Page 236 and 237:
CPU: Specifying Min and Max Limits
Page 238 and 239:
keira1# vparmodify -p keira2 -m cpu
Page 240 and 241:
-a is adding -d is deleting hw_path
Page 242 and 243:
Activating and Deactivating CPUs Wh
Page 244 and 245:
CPU: Dual-Core Processors With the
Page 246 and 247:
1/0/12 BUS_BRIDGE sv_model= 10 HPA=
Page 248 and 249:
NOTE: On a vPars system, when a vir
Page 250 and 251:
NOTE: Regarding syntax and how vPar
Page 252 and 253:
Examples • To add all hardware us
Page 254 and 255:
1. The explicit specification of an
Page 256 and 257:
Memory: Specifying Address Range Wi
Page 258 and 259:
CPU: Specifying Min and Max Limits
Page 260 and 261:
CPU: Adding and Removing Bound CPUs
Page 262 and 263:
NOTE: When executing any operations
Page 264 and 265:
intctl Command Notes The intctl com
Page 266 and 267:
Figure 8-7 Using Partition Manager
Page 268 and 269:
CPU: CPU Monitor (Formerly Known As
Page 270 and 271:
• For more information on using t
Page 272 and 273:
Cab/ Cell Slot/ # of L3 L4 Family/
Page 274 and 275:
Shell> fsN: fsN:\> efi\hpux\hpux /s
Page 276 and 277:
. . Configuring CLM for an nPartiti
Page 278 and 279:
CAUTION: • If you reduce the ILM
Page 280 and 281:
280
Page 282 and 283:
3. (PA-RISC only) allows you to cho
Page 284 and 285:
• make_tape_recovery within a vPa
Page 286 and 287:
After this virtual partition is rec
Page 288 and 289:
Archiving and Recovering a Virtual
Page 290 and 291:
Archiving and Recovering a Virtual
Page 292 and 293:
4. When the User Interface and Medi
Page 294 and 295:
Then proceed with the recovery as n
Page 296 and 297:
Terms and Definitions target partit
Page 298 and 299:
Flexible Administrative Capability
Page 300 and 301:
• display whether the vPars flexi
Page 302 and 303:
For this section, let’s assume we
Page 304 and 305:
304
Page 306 and 307:
Starting the Virtual Partition Mana
Page 308 and 309:
308
Page 310 and 311:
p7400/N4000 I/O Block Diagram Figur
Page 312 and 313:
312
Page 314 and 315:
Note that the entries for the unbou
Page 316 and 317:
316
Page 318 and 319:
For example, if we calculated the s
Page 320 and 321:
• containing 8 GB of total memory
Page 322 and 323:
322
Page 324 and 325:
324
Page 326 and 327:
CLP (Cell Local Processor) ILM (Int
Page 328 and 329:
E EFI, 37, 130, 139 EFI paths, 130
Page 330:
U unbound CPUs, 259 Uninterruptible
show all

HP-UX Virtual Partitions Administrator Guide - Hewlett Packard

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?