MOLDED-CASE CIRCUIT BREAKERS & EARTH ... - Piti Group
MOLDED-CASE CIRCUIT BREAKERS & EARTH ... - Piti Group
MOLDED-CASE CIRCUIT BREAKERS & EARTH ... - Piti Group
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
5. Accessories<br />
Internal Accessories<br />
Left-side<br />
mounting<br />
Handle AL AX SHT or UVT<br />
Right-side<br />
mounting MG EAL TBL PAL<br />
TI<br />
TBM<br />
Lead wire direction<br />
Type<br />
NV-C/ S/H<br />
NV400-CW/SW<br />
NV400-SEW/HEW/REW<br />
NV630-CW/SW<br />
NV630-SEW/HEW<br />
NV800-SEW/HEW<br />
Poles<br />
3, 4<br />
Switch<br />
type<br />
S<br />
AX + MG<br />
AL + AX + MG<br />
EAL<br />
Accessories<br />
TBL<br />
TBM<br />
✳1<br />
✳1<br />
PAL (contact output)<br />
Option for NV400-SEW/HEW/REW<br />
NV630-SEW/HEW<br />
Option for NV800-SEW/HEW<br />
✳2<br />
✳2<br />
TI<br />
Option for NV400-SEW/HEW/REW<br />
NV630-SEW/HEW<br />
Option for NV800-SEW/HEW<br />
The number within the circle shows the order of mounting.<br />
1. EAL, TBL, and TBM can be mounted regardless of the number of AL, AX, SHT, UVT and MG accessories. (However, two EALs, TBLs or TBMs cannot be mounted simultaneously.)<br />
2. The PAL’s dimensions and specifications change for the NF-C/S and NV-C/S series.<br />
✳ 1.<br />
SLT-equipped is standard. Control voltage (AC100-200V) is necessary. (In this case, no other accessories can be mounted to the breaker’s right pole.)<br />
✳ 2.<br />
SLT-equipped is standard. Control voltage (AC100-200V/DC100-200V) is necessary. (In this case, no other accessories can be mounted to the breaker’s right pole.)<br />
47
Change language