Installation Guide - Dana Corporation
Installation Guide - Dana Corporation
Installation Guide - Dana Corporation
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Installation</strong><br />
Controller Assembly <strong>Installation</strong><br />
1. Locate the controller assembly such that it can conveniently<br />
connect to the brake supply tank.<br />
2. Drill two holes on 4" centers to accommodate the<br />
mounting bracket. Attach the controller assembly<br />
with two 5/16" fasteners. See illustration below.<br />
CAUTION: The controller assembly must be mounted<br />
vertically with ECU connector down to prevent damage.<br />
See illustration below.<br />
CAUTION: Do not weld on bracket without first removing<br />
both ECU & Manifold from the bracket.<br />
CAUTION: Cover Controller Assembly prior to painting<br />
or undercoating trailer to prevent plugging of manifold<br />
and ECU vents.<br />
Cross<br />
Member<br />
5/16"<br />
Mounting<br />
Bolts<br />
218UX028<br />
17