DALI manual - Tridonic

More documents

Recommendations

Info

. c DALI multi controller: DALI MC 10) Stairwell function: close = command X, start run-on time, run-on time elapsed = command Y If the push-button is pressed, command X is sent and the run-on time starts. Once the run-on time has elapsed, command Y is sent. Table: Macro description Macro Macro 1: Go home Macro 2: MSensor automatic Macro 3: Sequential scene recall Macro 4: Dynamic scene Macro 5: DALI-Reset Macro 6: e-Power ON Level Macro 7: PCA compatibility Macro 8: User-defined DALI commands Description Delayed light off (slow fade down) Lighting control for the selected DALI MSensor is activated The next scene is called up each time button connected to the input is pressed. At the end of the sequence the process starts again from the beginning. Pressing the button calls up a sequence of four scenes. The cross-fade time and dwell time can be freely defined for each scene. Reset for the defined devices. As an option all the DALI addresses can be deleted Sets the Power ON Level of the DALI ballast to the predefined value. DALI devices that do not support this function ignore the command Sets the “PCA compatibility” parameter in PCA EXCEL lp devices of generation xitec I to the predefined value. DALI devices that do not support this function ignore the command This macro executes a COT file that can be created by the user. For an explanation of the commands see Appendix / Important DALI parameters and DALI commands. Default setting The DALI MC has the following factory default input settings: DALI Manual | 08-2013 | en 38 / 93
. c DALI multi controller: DALI MC Table 3: Default settings Input 1 Input 2 Input 3 Input 4 Destination address Broadcast Broadcast Broadcast Broadcast Function Button: CmdX on press, repeats CmdY on long press Button: CmdX on press, repeats CmdY on long press Button: sends CmdX Macro 2: MSensor automatic CmdX RECALL MAX OFF RECALL SCENE 1 - CmdY STEP UP STEP DOWN - - DALI Manual | 08-2013 | en 39 / 93
Page 1 and 2: luxCONTROL DALI manual
Page 3 and 4: . c Table of contents Table of cont
Page 5 and 6: . c Introduction: DALI standard Fea
Page 7 and 8: . c Introduction: DALI standard Pos
Page 9 and 10: . c DALI controllers of comfortDIM
Page 15 and 16: . c DALI devices DALI devices Elect
Page 17 and 18: . c DALI devices Electronic HID con
Page 19 and 20: . c DALI devices EM powerLED PRO EZ
Page 21 and 22: . c comfortDIM product series in de
Page 23 and 24: . c DALI group controllers: DALI GC
Page 31 and 32: . c DALI scene controllers: DALI-SC
Page 33 and 34: . c DALI scene controllers: DALI-SC
Page 35 and 36: . c DALI multi controller: DALI MC
Page 37: . c DALI multi controller: DALI MC
Page 41 and 42: . c DALI multi controller: DALI MC
Page 43 and 44: . c DALI TOUCHPANEL 02 Connection T
Page 45 and 46: . c DALI TOUCHPANEL 02 Figure: Over
Page 47 and 48: . c DALI x/e-touchPANEL 02 x-touch
Page 49 and 50: . c DALI x/e-touchPANEL 02 Emergenc
Page 51 and 52: . c DALI sequencer module: DALI SQM
Page 53 and 54: . c DALI MSensor 02 DALI MSensor 02
Page 55 and 56: . c DALI MSensor 02 Table: Grouping
Page 57 and 58: . c DALI USB DALI USB The DALI USB
Page 59 and 60: . c Designing a DALI application Ma
Page 61 and 62: . c Designing a DALI application Wi
Page 63 and 64: . c Designing a DALI application Sa
Page 65 and 66: . c Designing a DALI application Ta
Page 67 and 68: . c Designing a DALI application Op
Page 69 and 70: . c Designing a DALI application Ta
Page 71 and 72: . c Start-up Sample set-up for a co
Page 73 and 74: . c Start-up Installation The DALI
Page 75 and 76: . c Start-up Figure: Installing a D
Page 77 and 78: . c Start-up Setting up with master
Page 79 and 80: . c Start-up Step 3: Testing the ad
Page 81 and 82: . c Maintenance and troubleshooting
Page 87 and 88: . c Annex Important DALI parameters
Page 89 and 90:
. c Annex Current draw of the comfo
Page 91 and 92:
. c Annex DALI MSensor 02 broadcast
Page 93:
. c Reference list Reference list R
show all

DALI manual - Tridonic

Create successful ePaper yourself

Delete template?

Save as template?