INCH-POUND MIL-PRF-13830B 9 January 1997 SUPERSEDING ...

More documents

Recommendations

Info

$(Defining the \223Scope\224 of the wavefront standard)$

$(ASC OP1 \221Scratch and Dig\224 Draft Standard Review)$

$(ASC OP1 \221Scratch and Dig\224 Draft Standard Review) - oeosc$

MIL-PRF-13830B APPENDIX A A.6.2 Acquisition requirements. Acquisition documents should specify the following: a. Title, number and date of this specification b. Quantity desired c. Size of container: 1oz or 4oz d. Certified test report for this adhesive shall be available upon request by the procuring activity. e. Special Markings: 1. Adhesive Optical Thermosetting 2. Specification 3. Manufacturer’s name and address 4. Volume contained 5. Lot number 6. Manufacturer’s designation 7. Date of manufacture 8. Store in cool, dark place 32 Source: http://www.assistdocs.com -- Downloaded: 2006-05-24T15:32Z Check the source to verify that this is the current version before use.
MIL-PRF-13830B APPENDIX A NOTE: Glass type BK7 or equivalent Surfaces marked “P” polish, surface quality 80-50 FIGURE 1A. Glass disc (dimensions in inches) 33 Source: http://www.assistdocs.com -- Downloaded: 2006-05-24T15:32Z Check the source to verify that this is the current version before use.
Page 1 and 2: INCH-POUND MIL-PRF-13830B 9 January
Page 3 and 4: MIL-PRF-13830B 3.2.3 Bonding system
Page 5 and 6: MIL-PRF-13830B 3.5.3.2 Maximum size
Page 7 and 8: MIL-PRF-13830B 3.7 Optical componen
Page 9 and 10: MIL-PRF-13830B 3.7.10.2 Fractures a
Page 11 and 12: MIL-PRF-13830B will not impair the
Page 13 and 14: MIL-PRF-13830B For the classificati
Page 15 and 16: MIL-PRF-13830B herein. In case of d
Page 17 and 18: MIL-PRF-13830B test additional samp
Page 19 and 20: MIL-PRF-13830B shall be tested for
Page 21 and 22: MIL-PRF-13830B specified in the con
Page 23 and 24: MIL-PRF-13830B FIGURE 1. Resolving
Page 25 and 26: MIL-PRF-13830B APPENDIX A product w
Page 27 and 28: MIL-PRF-13830B APPENDIX A A.3.11 In
Page 29 and 30: MIL-PRF-13830B APPENDIX A A.4.3 Pre
Page 31: MIL-PRF-13830B APPENDIX A A.4.5.2 Q
Page 35 and 36: MIL-PRF-13830B APPENDIX B B.3.2 Opt
Page 37 and 38: MIL-PRF-13830B APPENDIX B PRF-13830
Page 39 and 40: MIL-PRF-13830B APPENDIX C COATING O
Page 41 and 42: MIL-PRF-13830B APPENDIX C In those
Page 43 and 44: MIL-PRF-13830B APPENDIX C C.3.8.5 A
Page 45 and 46: MIL-PRF-13830B C.4.3.1 Submission o
Page 47 and 48: MIL-PRF-13830B APPENDIX C reinspect
Page 49 and 50: MIL-PRF-13830B conform to the requi
Page 51 and 52: MIL-PRF-13830B APPENDIX C The film
Page 53 and 54: MIL-PRF-13830B APPENDIX C 1.8 One S
Page 55 and 56: MIL-PRF-13830B APPENDIX D ADHESIVE
Page 57 and 58: MIL-PRF-13830B TEST NO. PROPERTY TE
Page 59 and 60: MIL-PRF-13830B APPENDIX D operation
Page 61 and 62: MIL-PRF-13830B APPENDIX D been modi
Page 63 and 64: MIL-PRF-13830B APPENDIX D tested. T
Page 65 and 66: MIL-PRF-13830B APPENDIX D Departmen
Page 67 and 68: MIL-PRF-13830B APPENDIX D FIGURE 1D
Page 69 and 70: MIL-PRF-13830B APPENDIX E ASTM D471
Page 71 and 72: MIL-PRF-13830B APPENDIX E herein, u
Page 73 and 74: MIL-PRF-13830B APPENDIX E and multi
Page 75 and 76: MIL-PRF-13830B APPENDIX E coated on
Page 77 and 78: MIL-PRF-13830B APPENDIX E FIGURE 1E
Page 79 and 80: MIL-PRF-13830B APPENDIX E MARERIAL:
Page 81 and 82: MIL-PRF-13830B CONCLUDING MATERIAL

INCH-POUND MIL-PRF-13830B 9 January 1997 SUPERSEDING ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?