Software Manual - Vicon

Type Product Application Options Available
Workstation VN-VIEWER-16 The Viewer is a limited-functionality version of the ViconNet application that
operates on your PC prior to registration and is supplies free of cost.
The Viewer is also installed automatically on any CD or DVD that is created using
the Archive feature. In this way, an archive can be loaded and played on any PC.
(No software installation is required. The CD or DVD will already include the
necessary software.)
The Viewer provides only the basic Live and Playback viewing options. The only
system functions available are setting the site IPs, site authorization and
registration.
Multi-Viewer
VN-VIEWER-64
Camera Viewer
Viewer application that provides a solution for installations that require a larger
number of cameras to be viewed. This software increases the number of cameras
that can be viewed on a single workstation PC up to 64 cameras. Additionally, up to
4 monitors can be connected to view up to 64 cameras in a variety of
configurations. This viewer must be registered before it has full functionality.
NOTES:
It is strongly recommended that the Nucleus and backup Nucleus, whenever possible, should run on
dedicated Workstations.
• Small system – Less than 5 sites
In a small system, the Nucleus can be on any of the recorders or Workstations.
A backup Nucleus should only be configured if deemed necessary.
NOTE: If the Nucleus is configured on a recorder and the recorder is heavily loaded with recording
and transmissions, then the Nucleus should be moved to a dedicated Workstation.
• Medium/Large system – More then 5 sites
In a medium/large system the Nucleus and backup Nucleus should run on a dedicated Workstation.
For more details about the Nucleus, see Chapter 3, Configuring the ViconNet System.
8 • Introducing ViconNet XX112-36-00 Rev 909 Kollector Hybrid Network Digital Video Recorder