Software Manual - Vicon

To activate or deactivate a camera, click the camera icon on the map. If the camera icon is flashing, it is
deactivated. If it is steady, it is active.
NOTE: If there are two monitors connected to the Kollector, clicking Site Map in the Main window opens
the map set (the Working Set) on the second monitor.
For more details about Site Maps, see Chapter 3, Configuring the ViconNet System.
Groups
The ViconNet Groups list is a hierarchical list like the Site List, which displays the transmitters and devices
connected to your ViconNet system. The Groups list can be navigated using standard tree expand and
collapse functionality in the same way as the Site List. However, in contrast to the Site List, which is
organized by transmitters, the devices in the Groups list are organized by logical groups and group sets,
where each group can consist of cameras and microphones from multiple distinct transmitters.
Select Display
Group Set
Group
Devices
Device Name
Device
Secondary ID
You can define your groups and group sets by selecting Devices Group Sets from the System Settings
window, as described in Chapter 3, Configuring the ViconNet System.
NOTE: When defining device groups in the Devices Group Sets Management window, you can define one
group set as the Working Set. This is the group that will appear in the Groups list in the Main
window. To view a different group set, you must change the working set in the Devices Group Sets
Management window.
Groups are loaded in to the system using the Add New Group utility. (For more details about defining groups
and group sets, refer to the Defining Groups and Group Sets section in Chapter 3, Configuring the ViconNet
System.)
NOTE: The Groups list is only enabled after at least one group has been defined in the Devices Group
Sets Management window.
24 • Getting to Know ViconNet XX112-36-00 Rev 909 Kollector Hybrid Network Digital Video Recorder