Software Manual - Vicon

More documents

Recommendations

Info

• Force to be Primary: Enables you to force yourself to be the primary user, providing that you have the same or higher user priority than the current primary user (as defined in the User & Group Management window). If you force yourself to be the primary user, the P in the corner of the display on the current primary users display changes to S, and the S in the corner of your display changes to P. If the user is already the Primary user, the Force to be Primary option is disabled. If the user has lower priority than the current primary, and selects Force to be Primary, the message “Request to be primary was not approved” will be displayed. • Start Quick Playback From: Enables you to play video back from that camera (in an adjacent camera display location), without interrupting the recording process. This avoids having to remove one's eyes from the current live video while playing back to investigate suspicious activity, as would be the case if playback is initiated from the Navigator window. For details about how to perform Quick Playback, refer to Quick Playback in Chapter 6, Playing Back Recorded Video/Audio. XX112-36-00 Rev 909 Kollector Hybrid Network Digital Video Recorder Getting to Know <strong>Vicon</strong>Net • 29
• Start Playback From Time: Enables you to play video back from a live camera (in an adjacent camera display location). When Start Playback From Time is selected, calendar and time boxes are displayed. Site List Displays Selected Camera Name Select Date Select Database Select Time Select Database To select the database to be played back, click Select Database. A site list with Audio Video Databases (AVDB) is displayed in the lower-left panel. If there is no data in the database, a message is displayed. If there is data in the database, the playback image is displayed in the cell adjacent to the camera recording and it waits for you to press Play. If the selected database is the local database, you can either run it from there or by pressing Playback in the Navigator window. The advantage of activating the playback from the Main window, as opposed to from the Navigator window, is that all Main window functionality is still displayed. To activate Start Quick Playback From and Start Playback From Time, right-click the live camera (meaning, a camera which is currently recording) or right-click the camera in the Site list. If a camera is off, or if it is not live, the only option is Start Playback From Time. 30 • Getting to Know <strong>Vicon</strong>Net XX112-36-00 Rev 909 Kollector Hybrid Network Digital Video Recorder
Page 1: XX112-36-00 Kollector Hybrid Networ
Page 4 and 5: About This Manual The Kollector Sof
Page 6 and 7: Using the Central Failure Notificat
Page 8 and 9: Creating Macros and Schedules......
Page 10 and 11: Chapter 1 Introducing ViconNet This
Page 12 and 13: Frequently Asked Questions The foll
Page 14 and 15: • How do we save the recorded ima
Page 16 and 17: The software options that are avail
Page 18 and 19: UPS System Requirements Vicon requi
Page 20 and 21: Front Panel Indicators The followin
Page 22 and 23: Chapter 2 Getting to Know ViconNet
Page 24 and 25: 2. In the User Name field, enter yo
Page 26 and 27: Main Window Toolbar The ViconNet Ma
Page 28 and 29: Video and Recording Elements The Vi
Page 30 and 31: NOTES: The cameras that appear in t
Page 32 and 33: The map can be dragged to the middl
Page 34 and 35: Individual devices can be dragged f
Page 36 and 37: The selected location (indicated by
Page 40 and 41: Display Mode Controls The ViconNet
Page 42 and 43: In order to improve transmission sp
Page 44 and 45: Option Description Low bandwidth ca
Page 46 and 47: Function Description This button en
Page 48 and 49: • Main Window Display Location Ar
Page 50 and 51: To reverse a selection: • Select
Page 52 and 53: The Recorded Device Contents area d
Page 54 and 55: Playback Start Time Selector The pl
Page 56 and 57: The relevant device name is display
Page 58 and 59: The Synchronized Playback checkbox
Page 60 and 61: Alarm Window Whenever an alarm even
Page 62 and 63: NOTES: When an alarm event occurs i
Page 64 and 65: Exiting ViconNet Exiting is perform
Page 66 and 67: Chapter 3 Configuring the ViconNet
Page 68 and 69: Accessing the Configuration Functio
Page 70 and 71: Modifying the System Configuration
Page 72 and 73: Step 1: Setting the Sites' IP Addre
Page 74 and 75: Step 3: Configuring a Site to Conne
Page 76 and 77: 7. Repeat steps 4 through 6 on the
Page 78 and 79: To configure/modify a local camera:
Page 80 and 81: The window shows the live view of t
Page 82 and 83: When you have finished defining gri
Page 84 and 85: Configuring/Modifying Sensors (Dete
Page 86 and 87: Configuring/Modifying PTZ Controls
Page 88 and 89:
3. Click . All sites that appeared
Page 90 and 91:
4. In the Site List section, select
Page 92 and 93:
4. Select one of the display option
Page 94 and 95:
To add a new group: 1. From the Vic
Page 96 and 97:
Defining Users The ViconNet system
Page 98 and 99:
5. To add the same user to another
Page 100 and 101:
3. Click . The Site Authorization w
Page 102 and 103:
9. In the Site Authorization window
Page 104 and 105:
5. Enter the required user's user n
Page 106 and 107:
3. Click . The Storage Database Uti
Page 108 and 109:
10. To add an additional disk, repe
Page 110 and 111:
Once the hard disk is connected, it
Page 112 and 113:
Defining Device Groups and Group Se
Page 114 and 115:
6. To configure which groups to put
Page 116 and 117:
To edit a Group Set: • In the Dev
Page 118 and 119:
4. Make the required Quality (pictu
Page 120 and 121:
10. Select the required cameras and
Page 122 and 123:
Configuring Auto/Manual FPS (Frames
Page 124 and 125:
Manual FPS If you do not want to di
Page 126 and 127:
Error Type Message Displayed Explan
Page 128 and 129:
6. In the Verified Sites list area,
Page 130 and 131:
Creating Macros The ViconNet system
Page 132 and 133:
4. Click . The Macro Editor window
Page 134 and 135:
9. In the Duration field, use the u
Page 136 and 137:
14. (Optional) To add a new command
Page 138 and 139:
Command Setting Description Display
Page 140 and 141:
7. Enter the macro commands. The co
Page 142 and 143:
Defining Email and Texting The Emai
Page 144 and 145:
Setting Video and Audio Priority Th
Page 146 and 147:
• Enter priorities for each funct
Page 148 and 149:
Configuring Alarm Events An alarm e
Page 150 and 151:
To define alarm setup links: 1. Fro
Page 152 and 153:
7. Click to proceed to the next ste
Page 154 and 155:
The window shows the Live view of t
Page 156 and 157:
12. The Alarm Setup Wizard window i
Page 158 and 159:
15. (Optional) Select the required
Page 160 and 161:
18. Click . The device's new alarm
Page 162 and 163:
To set pre/post alarms: 1. From the
Page 164 and 165:
6. If you have configured pre alarm
Page 166 and 167:
Events Management ViconNet provides
Page 168 and 169:
7. Select what type of message to d
Page 170 and 171:
14. Select cameras and microphones
Page 172 and 173:
21. Each field on the screen can be
Page 174 and 175:
30. Select the folder that contains
Page 176 and 177:
To create a schedule: 1. Ensure tha
Page 178 and 179:
9. To select a specific date for th
Page 180 and 181:
Configuring Low Bandwidth You can u
Page 182 and 183:
Configuring an External Control Aft
Page 184 and 185:
NOTES: The Driver Name and Driver V
Page 186 and 187:
Defining Site Maps and Map Sets The
Page 188 and 189:
3. Enter the correct name for the n
Page 190 and 191:
Adding Sub-maps, Text Boxes and Dev
Page 192 and 193:
10. To add a device (camera, server
Page 194 and 195:
Make a network global set: A map se
Page 196 and 197:
If the third party camera license h
Page 198 and 199:
Third Party Format This section per
Page 200 and 201:
2. Click or select Open from the Fi
Page 202 and 203:
3. Click the button. The LTU Settin
Page 204 and 205:
Display Settings The Display Settin
Page 206 and 207:
2. Fill in your company details. 3.
Page 208 and 209:
Chapter 4 Viewing and Listening to
Page 210 and 211:
Viewing and Listening Workflow The
Page 212 and 213:
To select the display mode from the
Page 214 and 215:
NOTES: The cameras that appear in t
Page 216 and 217:
5. Proceed to the relevant steps in
Page 218 and 219:
To control the live picture quality
Page 220 and 221:
4. Use the PTZ controls in the vide
Page 222 and 223:
Chapter 5 Recording Live Video/Audi
Page 224 and 225:
Recording Live Video/Audio (On-Dema
Page 226 and 227:
The following example shows four li
Page 228 and 229:
Automatic Scheduled Recording The V
Page 230 and 231:
Chapter 6 Playing Back Recorded Vid
Page 232 and 233:
Playback Workflow The following wor
Page 234 and 235:
To select recorded video/audio: 1.
Page 236 and 237:
The default display location for th
Page 238 and 239:
Step 3: Selecting the Playback Time
Page 240 and 241:
4. Click . The Recorded Device Cont
Page 242 and 243:
The following example shows recorde
Page 244 and 245:
3. Click . The Navigator window clo
Page 246 and 247:
3. (Optional) Use the following but
Page 248 and 249:
If no recording is associated with
Page 250 and 251:
3. Click the button. The Museum Sea
Page 252 and 253:
Defining ROIs When the Museum Searc
Page 254 and 255:
Video Analytics The Analytics Searc
Page 256 and 257:
Creating Archives The ViconNet syst
Page 258 and 259:
5. In the Archive Name Ext field, e
Page 260 and 261:
Chapter 7 Managing Macros and Sched
Page 262 and 263:
To work with macros: 1. From the Vi
Page 264 and 265:
Chapter 8 Generating Reports This c
Page 266 and 267:
There are three saving options: Opt
Page 268 and 269:
Opening the Reports Window For all
Page 270 and 271:
Generating Alarm History Reports Th
Page 272 and 273:
Column Remote time Site Name Number
Page 274 and 275:
Generating Recording Status Reports
Page 276 and 277:
3. Search for events of interest us
Page 278 and 279:
Generating CFN Log Reports The CFN
Page 280 and 281:
Button Go to first page of events D
Page 282 and 283:
8. Click . The following will displ
Page 284 and 285:
4. Right click an event in the list
Page 286 and 287:
Chapter 9 Printing/Exporting Frames
Page 288 and 289:
Exporting Frames You can save selec
Page 290 and 291:
Appendix A Configuring the Personal
Page 292 and 293:
10. Repeat steps 8 and 9 for each p
Page 294 and 295:
Opening the RDP Option (Port) Withi
Page 296 and 297:
Appendix B Configuring the Network
Page 298 and 299:
Configuring a Network with DHCP Thi
Page 300 and 301:
Appendix C Setting Up a VPN Service
Page 302 and 303:
6. Select the Accept incoming conne
Page 304 and 305:
Step 2: Setting Up the Dialup Conne
Page 306 and 307:
6. Select the My use only radio but
Page 308 and 309:
Step 4: Setting Up the VPN Network
Page 310 and 311:
Appendix D Using Video Analytics Th
Page 312 and 313:
Appendix E Running ViconNet as a Se
Page 314 and 315:
If you want to have ViconNet run as
Page 316 and 317:
Vicon Standard Equipment Warranty V
show all

Software Manual - Vicon

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?