H-CMMD4059.pdf (621.43 кб) - Hyundai Electronics
H-CMMD4059.pdf (621.43 кб) - Hyundai Electronics
H-CMMD4059.pdf (621.43 кб) - Hyundai Electronics
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Installation/Connection<br />
Parking wire connection<br />
Parking brake lead<br />
Brown Wire<br />
Battery<br />
Brake light<br />
Car frame<br />
If Parking cable is connected to hand brake switch, the video display of the TFT monitor will be<br />
controlled by driving status, system setup and input video sources. When the car is moving ahead,<br />
if the video disc is played, the screen shows “ATTENTION!! You cannot use this function while<br />
driving”, and blank screen. The above warning screen will prevent the driver from watching images.<br />
Reverse driving cable connection<br />
Car frame<br />
Reverse driving light<br />
Pink wire<br />
Rear view video camera lead<br />
Battery<br />
Car frame<br />
Gearbox<br />
If the rear view video camera is connected, the unit automatically switches to CAMERA source<br />
during reverse driving. The unit returns to the original work mode after the reverse driving is done.<br />
Illumination wire<br />
The illumination wire should be connected to marker lights of the vehicle. The illumination<br />
(backlight) backilght is possible only when the marker lights are switched on.<br />
9
Change language