Processing and working instructions HPL and HPL elements PR ...

PRODUCT INFORMATION
Cleaning recommendations
Cleaning instructions and example explanations of special problems are given below. The mildest method
should always be used first.
Slight, recent soiling
Normal soiling, longer-acting
Heavy, stubborn soiling, old stains
Dust, dirt, dust-grease mixture, pencil, chalk
Paper towels; soft, clean cloths (dry or damp); sponge etc.
When cleaning damp, wipe dry with absorbent paper towels.
Clean, hot water, clean cleaning rags or cloths, soft sponge or brush. Micro- fibre cloths soaked in
hot water are particularly suitable.
Apply normal cleaning agents without abrasive components, washing-up liquid, soft or hard soap
and leave to soak in according to the level of soiling, and then remove completely in order to prevent
streaks from forming. Wipe dry with clean, and absorbent cloths (ideally paper towels), changing the
cloths frequently.
grease, oil, fingerprints, felt and marker pens, inks, nicotine deposits,
rubber abrasion marks
Cleaning method as for dust, dirt, pencil, chalk.
Cleaning method as for dust, dirt, pencil, chalk. Organic solvents such as acetone, white spirit,
petrol, nail-varnish remover.
Leave detergent or paste produced from detergent and water to act overnight; liquid cleaner with
very fine polishing powder.
Do not use on high-gloss surfaces
Mild bleaching agent (with care).
Should only be used occasionally! Bleaching agent should be removed completely after
a short action time (10 – 15 minutes)!
099 PI Processing and working instructions Page 30 of 34