Processing and working instructions HPL and HPL elements PR ...

PRODUCT INFORMATION
Important instructions
During use, please clean the DUROPAL HPL surface regularly. Special cleaning substances are not
generally required. Streaks can occur when cleaning with organic solvents containing oil (e.g. white spirit),
as well as with cold water and frequently used cloths or window leathers. To ensure cleaning does not
result in dark patches and streaks, the surface should be rinsed with hot water and then wiped dry using
normal household paper towels. Avoid using furniture polishes and cleaning agents containing wax as
these tend to impair the surface textures of the DUROPAL HPL surfaces and build up into a dirt-retaining
layer. For regular cleaning, please do not use any abrasive agents; furniture polishes, furniture cleaning
and bleaching agents should also be avoided.
Cleaning agents containing strong acids or salts will damage the surface (limescale removers based on
formic and aminosulphuric acid, drain cleaner, hydrochloric acid, silver polish and oven-cleaner).
Please note when cleaning with solvents:
• Follow accident prevention regulations
• Open the windows
• Do not expose to naked flames
If you have any questions, please feel free to contact us at any time.
Closing statement:
All the information contained here is based on the current status of the science and technology.
It does not constitute a guarantee. It is the personal responsibility of the individual user of the products
described in this data sheet to observe the existing laws and regulations.
A service of
PFLEIDERER Industrie GmbH • Product Management
Holzstraße 6 - 10 • D-33332 Gütersloh • Telephone: 0 52 41 / 8 71 - 0 • Telefax: 0 52 41 / 8 71 - 9 87
e-mail: produktmanagement@pfleiderer.com • Internet: www.industrie.pfleiderer.com
099 PI Processing and working instructions Page 34 of 34