hp scanjet 7400c series scanner setup and ... - Hewlett Packard

More documents

Recommendations

Info

8 Installing and troubleshooting 5. Connect interface cable a Turn off the computer. b Choose ONE: ● Connect the USB cable between the USB ports on the scanner and the computer. ● Connect the SCSI cable between the SCSI ports on the scanner and the computer. SCSI USB 6. Connect the power cable a Connect the power cable between the scanner and a surge protector or grounded wall outlet that is easily accessible. This turns on the scanner. (There is no power switch.) b Turn on the computer.
Installing and troubleshooting 9 7. Change the front panel overlay (if necessary) The scanner has a front panel overlay installed. If necessary, change the overlay to match your language. a From the bottom, front center of the overlay, gently lift the overlay off of the scanner. b Align the pegs on the back of the new overlay with the holes on the scanner and snap the overlay into place.
Page 1 and 2: hp scanjet 7400c series scanner set
Page 3 and 4: 1 Installing and troubleshooting Th
Page 5 and 6: Installing and troubleshooting 5 2.
Page 7: Installing and troubleshooting 7 4.
Page 11 and 12: Installing and troubleshooting 11 C
Page 13 and 14: Checking connections Installing and
Page 15 and 16: Installing and troubleshooting 15 T
Page 17 and 18: Connecting the scanner Installing a
Page 19 and 20: Changing the SCSI address Installin
Page 21 and 22: 2 Support, Support, warranty, and s
Page 23 and 24: Support, warranty, and specificatio
Page 27 and 28: Warranty Statement Support, warrant
Page 29 and 30: Specifications Environmental specif
Page 31 and 32: ADF ADF Feature Specification XPA S
Page 37 and 38: Recycling materials Support, warran

hp scanjet 7400c series scanner setup and ... - Hewlett Packard

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?