DryLin linear guides - ASI Automatikk

DryLin ® W – Flexible Linear Guide System
DryLin ® W – Technical Information
DryLin ® W
+90º
–40º
Technical data
Sliding elements: maintenance free
Material:
Maximum surface speed:
iglidur ® J200
15 m/s
Temperature range: -40°C to +90°C
DryLin ® W is offered as a cost-effective, harnessed system. The design of DryLin ® W promotes
flexibility of design and ease of assembly, with both single and double rail configurations. hard
anodized aluminum is used as the rail material, thus DryLin ® W also offers low wear, low friction
without lubrication, resistance to dirt and dust, low weight and quiet operation.
Special properties:
Resistant to dust and dirt
Flat and wide for supporting high moments
Allows flexible use of design space
Low friction value for dry running
Rugged, corrosion-free and wear-resistant
Low-noise operation
Rails made of hard anodized aluminum
Liners made of iglidur ® J200
Dimensions allow use with commercial aluminum profiles
DryLin ® W – single rail
Design Tips
DryLin ® W
Maximum design space flexibility:
Phone +49- (0) 22 03-96 49-145
Fax +49- (0) 22 03-96 49-334
igus ® GmbH
51127 Cologne
DryLin ® W used for a stop
dog in the glass industry
DryLin ® W in permanent
use in a conveyor belt
Advantages of DryLin ® W
Easy installation, maintenance-free
Economic slide made of zinc die-casting with JUM liners
Dry running properties make the system dirt resistant
Light-weight and low-noise
Tolerates high moments
Suitable for single-axis systems
1 Hard anodized aluminum rail
2 Liners made of iglidur ® J / J200
3 Housing made of chromated zinc die-casting
4 Mounting plate made of anodized aluminum in
2 widths and 3 lengths for each size
Shaft diameters: 6, 10, 16 and 20 mm
Rail widths: 40, 60 and 80 mm and single rails
Rail lengths: up to 4000 mm
Slide lengths: 100, 150, 200 mm or individual
Slide widths: 73 mm up to 134 mm
Part number for a complete system:
WK-10-40-15-01,1500 mm
Order example, complete system:
Length of rail
Number of carriage plates
Length of carriage plate
Support width
Shaft diameter
Complete DryLin ® W system
WK-10-40-15-01, 1500:
complete system, consisting of 1500 mm rail with a 150 mm-long
and 40 mm-wide guide slide
Table 559.1: Load capacities for complete carriage plates
Type Coy Coz Mox Moy Moz
[N] [N] [Nm] [Nm] [Nm]
WW-10-40-10 4800 4800 96 170 170
WW-10-40-15 4800 4800 96 290 290
WW-10-40-20 4800 4800 96 410 410
WW-10-80-10 4800 4800 178 170 170
WW-10-80-15 4800 4800 178 290 290
WW-10-80-20 4800 4800 178 410 410
WW-16-60-10 8400 8400 240 270 270
WW-16-60-15 8400 8400 240 480 480
WW-16-60-20 8400 8400 240 690 690
WW-20-80-15 12800 12800 525 670 670
WW-20-80-20 12800 12800 525 990 990
WW-20-80-25 12800 12800 525 1250 1250
Increase design freedom and save space at the same time.
DryLin ® W – manual clamping
DryLin ® W manual clamping developed for simple functions
Part number: WHKA-10 / WHKA-20
DryLin ® W – various sliding elements
Phone +49- (0) 22 03-96 49-145
Fax +49- (0) 22 03-96 49-334
mm
Internet: www.igus.de
E-mail: info@igus.de
DryLin ® W for guiding the
igus ® energy chain in an
inkjet printer
J200QM-01-... J200UM-01-...
Part number structure for the liners:
J200QM-01-... square liner for square rails WSQ-...
and for housing bearing WJ200QM-...
J200UM-01-... round liner for round rails WS-...
and for housing bearing WJUM-...
262
Lifetime calculation, CAD files and much more support www.igus.de/en/DryLinW Lifetime calculation, CAD files and much more support www.igus.de/en/DryLinW
263