Download - BHEL Bhopal

DOCUMENT NO. KVE/CAD/0513/001
SPECIFICATION FOR EMPANELMENT OF VENDORS FOR 3D-MODELING
BHARAT HEAVY ELECTRICALS LTD is the largest engineering and manufacturing enterprise in
India in energy related infrastructure sector today. BHEL was established 57 years ago when its first
plant was set up in Bhopal. BHEL has 15 manufacturing divisions, 4 power sector regional centers, 8
service centers, 18 regional offices and a large number of Project Sites spread over India and
abroad. Its products span areas like Power Generation, Transmission & Distribution,
Transportation, Oil & Gas and Renewable Energy sectors.
The company has planned to undertake a major initiative in automating its Design & Engineering
functions and also changeover from 2-D to 3-D platform and integrate its design & drawing
practices from Concept to Manufacturing.
There are nearly 60 product groups identified for design automation projects. These projects will
be taken up in a phased manner by the respective units. A significant step in the direction of
achieving above objective is moving all the products to 3D platform, which BHEL plans to
accomplish to a larger extent within one year, through outsourcing the 3D modeling activities..
The no. of 3D models may exceed Fifty thousand numbers with varying degrees of complexities
from simple operations like Extrusion & Revolution to complex operations like Advanced Free form
Surfacing ,Variable Section Sweep, Advanced Filleting, Advanced Rounds etc.
The total estimated value of work to be outsourced is Rs.50
Crores (approx.) comprising of varying
complexities of products across organization, in a time frame of 2 years.
In order to achieve this objective, BHEL plans to empanel 3D CAD development vendors engaged
in the areas of Engineering services, for the broad scope of work mentioned below, subject to their
fulfilling requirements listed, thereafter:
1. SCOPE OF WORK
Vendor to note broad scope of work, which this empanelment is intended for, mentioned
under Annexure-III. Vendor to convey acceptance to all the major terms & conditions
listed under Annexure-III, which would form part of tender for 3D modeling work. Vendor
to clearly bring out in their proposal, the non-conformance to any clause listed, therein.
BHEL reserves the right to reject the proposal in case of non-conformance/partial
conformance/conditional conformance to any of the clauses stated under Annexure-III. If
non-acceptance to any clause is not clearly brought out by vendor, it will be deemed that
all clauses listed under Annexure-III, are acceptable to vendor.
2. NATURE OF ORGANISATION
The Vendor should either be a fully operational (i) Engineering Services Organization, or
(ii) Engineering Services Division of a Software Organization, or
(iii) An Engineering Services Division of a Manufacturing Organization using CAD tools,
fully devoted to such services outside their own organization, or
(iv) 3D modeling software OEMs/Principals (or their wholly owned subsidiaries/authorized
partners in India).
Vendor should not be a direct or indirect partner/subsidiary/affiliates /affiliates of any nature, to
BHEL’s competitors or have direct or indirect business interest in BHEL’s product profile.
Page 2 of 22