On-Line Help Guide - AccuRev

More documents

Recommendations

Info

The New Workspace Command: Screen 3 of 3— Configuring the Workspace) Type of File Locking This setting controls whether development in this workspace uses serial or parallel methodology. If you choose parallel development, you may still be restricted to using serial development on certain files; AccuRev supports locks on individual file elements. (See File Locking on page 271.) None (parallel development): The version-controlled files in the workspace tree are writable at any time. There is no need to perform an anchor operation on a file before beginning to work on it. Anchor Required: Each version-controlled file in the workspace tree is read-only until you use the Anchor command to make it writable. This also makes the file active in the workspace. Note: The Anchor command makes the version currently in the workspace. Exclusive Lock: Like Anchor Required, and also causes AccuRev to prevent users in sibling workspaces from working on the same file concurrently. (See File Locking on page 271.) Initial Contents Same as Basis stream For each element, AccuRev copies the current version in the backing stream to the workspace tree. If no version of an element currently appears in the backing stream, it won't appear in the new workspace, either. Pick and choose from Basis stream: AccuRev doesn't copy any files to the workspace tree. To begin working in the workspace, use the File Browser's Include/Exclude facility to configure the 24 AccuRev® On-Line Help Guide
set of elements to appear in the workspace. (Using the File Browser's Include/Exclude Mode on page 98.) EOL (Text-file line terminators) Whenever AccuRev copies a version of a text file from the repository to the workspace tree, it uses the line terminator you configure here. Platform EOL: Use the line terminator for the operating system on the machine where the AccuRev GUI is running. Always use Windows EOL: Use the sequence CR-LF (hex 0C-0A) as the line terminator. Always use UNIX EOL: Use NL (hex 0A) as the line terminator. The New Stream and Change Stream Commands (Stream Configuration dialog) The New Stream and Change Stream commands open a dialog in which you specify/revise the configuration of a new/existing stream. Invoking the Command In the StreamBrowser, right-click a stream to select it and display its context menu. Then, • Choose New Stream from the context menu to create a new stream below the selected stream. • Choose Change Stream from the context menu to revise the configuration of the selected stream. Using the New Stream / Change Stream Dialog Enter or revise the following specifications, then click Ok. AccuRev® On-Line Help Guide 25
Page 1 and 2: AccuRev ® On-Line Help Guide Versi
Page 3 and 4: Preface This book documents the Acc
Page 5 and 6: • A brief description of the prob
Page 7 and 8: Table of Contents Preface..........
Page 9 and 10: AccuRev Preferences (Tools > Prefer
Page 11 and 12: The Patch Algorithm................
Page 13 and 14: Change Package Dependencies .......
Page 15 and 16: Commands Available in a Merge Tab..
Page 17 and 18: The New URL Attachment Dialog .....
Page 19 and 20: 1. Overview of the On-Line Help Thi
Page 21 and 22: • We have brought back a PDF vers
Page 23 and 24: 2. Using the AccuRev GUI This chapt
Page 25 and 26: Current User, Depot, and Workspace
Page 27 and 28: Once configured, the Web UI can be
Page 29 and 30: Adjusting the Widths and Order of C
Page 31 and 32: Previewing What You Print When you
Page 33 and 34: Filter Results Optionally, use the
Page 35 and 36: CSV ("comma-separated values") A li
Page 37 and 38: Basic Options Depot Name No two dep
Page 39 and 40: Depot Select one of the repository'
Page 41: Location You can specify any locati
Page 45 and 46: Setting a basis time on a stream do
Page 47 and 48: Controlling Which Workspaces are Di
Page 49 and 50: During execution of the Update comm
Page 51 and 52: By default, AccuRev allows you to e
Page 53 and 54: The Show Info dialog displays overa
Page 55 and 56: Invoking the Login Command Choose T
Page 57 and 58: Using the Change Password Dialog Ty
Page 59 and 60: AccuRev Preferences (Tools > Prefer
Page 61 and 62: command, and is used by other AccuR
Page 63 and 64: • Press function key F5. Merge Sp
Page 65 and 66: Depots Tab Layout Status (appears i
Page 67 and 68: Working in a Reference Trees Tab Yo
Page 69 and 70: Slices Tab Layout The Slices tab co
Page 71 and 72: Except for The lock applies to all
Page 73 and 74: 3. The File Browser AccuRev's job i
Page 75 and 76: Working in the File Browser's Panes
Page 77 and 78: Workspace Explorer Command Referenc
Page 79 and 80: Search Progress Box A search can be
Page 81 and 82: merged element with a (kept) (Membe
Page 83 and 84: To enter a search string, type the
Page 85 and 86: The Details pane columns are: Name
Page 87 and 88: Link element: the keyword link. Id
Page 89 and 90: The Version column shows the versio
Page 91 and 92: • Reverting namespace changes If
Page 93 and 94:
Deleting a File -- Intentionally an
Page 95 and 96:
In this example, the Merge involved
Page 97 and 98:
The first time you Keep a file, it
Page 99 and 100:
Element or symbolic link: this comm
Page 101 and 102:
Copy (workspace Edit menu only) Des
Page 103 and 104:
New Folder Bring up a dialog to cre
Page 105 and 106:
A cross-linked element (see (xlinke
Page 107 and 108:
(underlap) The element has changed
Page 109 and 110:
• Modified • Kept • Non-Membe
Page 111 and 112:
For details about using the Merge v
Page 113 and 114:
Choose the destination stream works
Page 115 and 116:
Defuncting Twin Elements AccuRev le
Page 117 and 118:
subset. The File Browser's Include/
Page 119 and 120:
Working in the Rules Pane The secti
Page 121 and 122:
Include from Stream Establish a cro
Page 123 and 124:
• add back to the workspace just
Page 125 and 126:
• Sets the element status—The f
Page 127 and 128:
Annotate Tab Layout The contents of
Page 129 and 130:
The Defunct dialog appears, prompti
Page 131 and 132:
... identifies the 17th version of
Page 133 and 134:
Using the New Folder Dialog You can
Page 135 and 136:
changes — the modifications in ve
Page 137 and 138:
Recursive For each selected element
Page 139 and 140:
(AccuRev "seeds" the text box with
Page 141 and 142:
The Rename Dialog The Rename comman
Page 143 and 144:
Invoking the Revert Command There a
Page 145 and 146:
Specifying the Basis Version of the
Page 147 and 148:
using the Send to Issue (specifying
Page 149 and 150:
Run in Background Close the progres
Page 151 and 152:
• Send to Workspace / Anchor Dyna
Page 153 and 154:
• Merge (ends by performing a Kee
Page 155 and 156:
4. The StreamBrowser AccuRev's uniq
Page 157 and 158:
workspace stream snapshot (static s
Page 159 and 160:
Tabular StreamBrowser Display In ta
Page 161 and 162:
Viewing a Stream's Current Developm
Page 163 and 164:
context menu of the stream or works
Page 165 and 166:
Tip: Both the Name and Value column
Page 167 and 168:
The properties you selected are rem
Page 169 and 170:
shows how the menu choices appear i
Page 171 and 172:
3. In the Name field, enter the nam
Page 173 and 174:
Tip: If you check the Do not show t
Page 175 and 176:
The user, and all of that user’s
Page 177 and 178:
Default Group Subwindow Layout The
Page 179 and 180:
Displaying and Filtering Stream Fin
Page 181 and 182:
Working in a Stream Diff (Files) Ta
Page 183 and 184:
Stream Issues Tab Layout The Stream
Page 185 and 186:
The following illustration shows th
Page 187 and 188:
2. Promote the issue to the new str
Page 189 and 190:
At this point, issue record #13 is
Page 191 and 192:
Change Package Contents Pane The in
Page 193 and 194:
"Checkout" and "Revert to Backed" t
Page 195 and 196:
Display the depot's stream hierarch
Page 197 and 198:
Example 3: If patching from version
Page 199 and 200:
ecent changes" restriction to the s
Page 201 and 202:
Three Ways to Modify a Change Packa
Page 203 and 204:
version X would create a new versio
Page 205 and 206:
To examine the unaffiliated version
Page 207 and 208:
(typically, the 'recent changes' ma
Page 209 and 210:
AccuRev assumes that changes made t
Page 211 and 212:
5. The History Browser The History
Page 213 and 214:
Action The kind of transaction: kee
Page 215 and 216:
Once a certain set of transactions
Page 217 and 218:
View Open a text editor on a tempor
Page 219 and 220:
History Browser / Summary Pane Cont
Page 221 and 222:
• A yellow box for each version o
Page 223 and 224:
• version 5 in stream brown_dvt i
Page 225 and 226:
Note: Patching and the closest comm
Page 227 and 228:
Compare the selected version with a
Page 229 and 230:
6. Diff, Merge, and Change Palette
Page 231 and 232:
Note that the file you selected is
Page 233 and 234:
AccuRev displays the Diff view. See
Page 235 and 236:
Both sections contain red character
Page 237 and 238:
panes directly to the corresponding
Page 239 and 240:
4. Finish your work in either of th
Page 241 and 242:
Opening a Change Palette Tab Before
Page 243 and 244:
active in the stream. In either one
Page 245 and 246:
2. Invoke the Send to Change Palett
Page 247 and 248:
Other Indicators and Controls The S
Page 249 and 250:
Sending Versions to the Destination
Page 251 and 252:
Patching Changes from the Source Ve
Page 253 and 254:
Resolve Twin Status Provides a wiza
Page 255 and 256:
• In the Change Palette, to merge
Page 257 and 258:
• For a conflicting change, the b
Page 259 and 260:
The counter typically changes as yo
Page 261 and 262:
Warning: swaps of this kind also di
Page 263 and 264:
Navigation Buttons First change/con
Page 265 and 266:
The Search Command The Search comma
Page 267 and 268:
• How can I tell which is the clo
Page 269 and 270:
• Identical change: Both contribu
Page 271 and 272:
ancestor of the newly created versi
Page 273 and 274:
Note: What are the "EID" annotation
Page 275 and 276:
Each of the above changes creates a
Page 277 and 278:
Note: You can think of the Merge to
Page 279 and 280:
7. Security This topic presents an
Page 281 and 282:
The following table shows you where
Page 283 and 284:
In many situations, you may be able
Page 285 and 286:
The Users/Groups list box displays
Page 287 and 288:
Setting Permissions on a Directory
Page 289 and 290:
Removing Permissions Use this proce
Page 291 and 292:
workspaces). In an anchor-required
Page 293 and 294:
2. In the User Name field, specify
Page 295 and 296:
Working in a Security/Groups Subtab
Page 297 and 298:
Note: Because permissions are inher
Page 299 and 300:
Add ACL Entry Change ACL Entry The
Page 301 and 302:
Add Server Identify an instance of
Page 303 and 304:
A. Miscellaneous Error Displays No
Page 305 and 306:
B. AccuWork This chapter describes
Page 307 and 308:
Special Subtabs Every edit form has
Page 309 and 310:
When you save an issue record: •
Page 311 and 312:
Toolbar Tool Description Contains t
Page 313 and 314:
Define a new attachment to be the a
Page 315 and 316:
Link Issue Create a relationship li
Page 317 and 318:
"Changes" Subtab Layout The Changes
Page 319 and 320:
Field The field whose value changed
Page 321 and 322:
Issue Record Queries The AccuWork Q
Page 323 and 324:
Query List Pane Layout The Query Li
Page 325 and 326:
Most commands operate on the curren
Page 327 and 328:
Working in the Query Results Pane I
Page 329 and 330:
• After modifying a record and in
Page 331 and 332:
Working in the Query Editor Video T
Page 333 and 334:
Timestamp Attachments internal is i
Page 335 and 336:
Ending the Query Editor Session Whe
Page 337 and 338:
Invoking the Schema Editor Choose A
Page 339 and 340:
on page 347.) See Also: The AccuWor
Page 341 and 342:
Internal A positive integer. None.
Page 343 and 344:
accurev mktrig -p pre-promote-trig
Page 345 and 346:
4. Close the Schema Editor tab. The
Page 347 and 348:
The layout for a multiple-page edit
Page 349 and 350:
A gray box with the specified title
Page 351 and 352:
The new name is added to the listbo
Page 353 and 354:
Working on a Relationship Types Sub
Page 355 and 356:
Conditional Validations The setting
Page 357 and 358:
• Requiring a relationship with a
Page 359 and 360:
Requiring a Relationship with Anoth
Page 361 and 362:
In this section, you also specify t
Page 363 and 364:
Each clause of a condition performs
Page 365 and 366:
• If the query does select issue
Page 367 and 368:
• The client-side processing -- q
Page 369 and 370:
C. Support and Troubleshooting Cust
Page 371 and 372:
$acjre -Daccurev.debug.acapi -Daccu
Page 373 and 374:
Replication problems Send to Custom
Page 375 and 376:
The Logs Tab The Logs tab provides
Page 377 and 378:
To change the logging level, modify
Page 379 and 380:
Notes on Internet Explorer Allowing
Page 381 and 382:
Index A accelerators keyboard 7 Acc
Page 383 and 384:
the AccuRev client log file 357 the
Page 385 and 386:
support contacting technical suppor
show all

On-Line Help Guide - AccuRev

Create successful ePaper yourself

Delete template?

Save as template?