Training by Schneider Electric - WF Senate

Protection/product courses
GenieEvo switchgear
The fundamental principle of controlling danger with the operation of High Voltage (HV) and Low Voltage (LV)
circuit breakers lies at the centre of all networks, from a major transmission system, down to a simple radial LV
distribution board. Failure of a device to operate correctly could result in serious damage and endanger personnel.
These courses enable delegates to grasp the characteristics of these essential products, covering the correct
installation and set up of breakers and its allied protection.
Objectives
@ Delegates will safely operate the circuit breaker to secure the
point of isolation and earthing appropriately
Content
Overview presentation, with notes:
@ Introduction to the switchgear
@ Definition of the main variants and ratings
@ Architecture and main components
@ Evolis vacuum circuit breaker
@ Controlled air disconnector
@ Voltage transformer
@ Endurance characteristics
@ Overview of the Sepam protection system
Target audience
@ Your scope: Public and commercial
buildings
@ Your job: Maintenance manager, electrical
engineer, facilities manager
Prerequisite knowledge
@ None
Duration and delivery
@ A one day course
@ In-class sessions within
Schneider Electric training centres
@ Can be customised and delivered on
customer premises
Demonstration, followed by hands-on operation:
@ Isolator and circuit breaker mechanism operation
@ Cable testing facility
@ Voltage transformer compartment
@ Protection reset
@ Visual checks
Equipment used
@ GenieEvo switchgear
Training code: 118
For further information
or registration
@ Contact your local Schneider Electric
customer training centre
10