BEARING HOUSINGS - CBC Bearings

A
SEALING ARRANGEMENTS
Steel trolley wheel roller
assembly. Components supplied
fully assembled with
bearings and shaft.
Mixing table support unit.
Incorporating duocone face seal.
Supplied fully assembled
with fabricated frame.
Two-piece Taconite cover
assembly for gearbox.
Cast cover with two-piece steel
labyrinth seal and oil seal.
Casting features drain cavaties
for gearbox lubrication.
In-line fan housings for fans where
shaft speed is too high for self aligning
bearings. Housings are line bored to
ensure no shaft misalignment. Can be
supplied fabricated as shown or cast.
Kiln car wheels can be supplied in
various materials for optimum wear life.
Available as a complete unit as
shown or individually.
Special seal cartridge
encorporating a floating face seal.
Ideal for slow turning applications,
extremely aggressive
environments. Example shown
is a screw conveyor.
Split housing complete with split covers
and labyrinth seal. Design allows for both
standard solid bearing and replacement
split roller bearing.
Wire rope sheaves assembled with
dual frame. Frame is line bored
after fabrication to ensure pin is
aligned. Standard on all sheave
frames.
CFCN with reversed stepped
shaft design. Incorporates twopiece
viton seals with grease
purge facility. Seal design allows
for inbuilt shaft expansion on
floating end unit.
21