manual - Sharkoon

Content
1. Features
2. Fan configuration
3. Package contents
4. The case at a glance
5. Installation of a mainboard
6. Installation of a PSU
7. Installation of a HDD
8. Installation of an optical device
9. Installation of an additional 3.5" device
10. Installation of an add-on card
11. The pre-installed fans
12. Installation of additional fans / optimized airflow
13. The docking station for SATA HDDs in the case’s top panel
1. Features
• ATX case
• 5x 5.25" drive bays (external)
• 3x 3.5" drive bays (internal)
• Top I/O with 2x USB2.0, 1x eSATA, 1x headphone and 1x microphone
connector, power and reset button as well as LEDs for power and HDD activity
• Installed SATA docking station in case top (for 2.5" and 3.5" HDDs)
• Pre-installed card reader with USB2.0 connector (supported card formats:
SD/SDHC, MS, MMC, CF)
• 7 slots for add-on cards
• Mesh front panel for optimized cooling
• Quick fasteners for optical drives
• Dimensions: 485 x 485 x 200 mm (L x H x W)
• Weight: ~ 6.6 kg
2. Fan configuration
Dear customer!
Congratulations for purchasing one premium quality SHARKOON product.
For a long life time and to take full advantage of this product we recommend that
you read this manual completely.
Have a good time with our product!
SHARKOON Technologies
Case front
Side panel
Back side of case
Top panel
3. Package contents
1x 120mm LED fan with 3-pin and 4-pin connector
(pre-installed)
2x 140mm or 2x 120mm fans (optional)
1x 120mm or 1x 80mm fan (optional)
1x 180mm LED fan (pre-installed)
• ATX-case “Bandit” (1x 120mm LED fan in the case front,
1x 180mm LED fan in the top panel and card reader pre-installed)
• Accessory kit:
Stand-offs for
mainboard
Screws for drive/
mainboard mounting
Screws for HDD/
PSU mounting
Screws with
coarse thread
bandit