HD Color Video Camera â EVI-H100S/H100V A - Full Compass
HD Color Video Camera â EVI-H100S/H100V A - Full Compass
HD Color Video Camera â EVI-H100S/H100V A - Full Compass
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Basic Functions<br />
Zoom/Focus<br />
Mode<br />
Power Off 1) Power On<br />
Command<br />
IFC 2) Initializing 3) Zoom Direct Focus Direct AF ON<br />
During displaying<br />
the menu<br />
Memory Recall<br />
CAM_Zoom Tele/Wide/Stop [VISCA] No No No No Yes Yes Yes 4) No<br />
CAM_Zoom Tele/Wide/Stop [RC] No No No No Yes Yes Yes 4) No<br />
CAM_Zoom Direct No No No Yes Yes Yes Yes 4) No<br />
D-Zoom Limit No No No No Yes Yes Yes 4) No<br />
CAM_Focus Far/Near/Stop [VISCA] No No No Yes No No Yes 4) No<br />
CAM_Focus Far/Near/Stop [RC] No No No Yes No No Yes 4) No<br />
CAM_Focus Direct No No No Yes Yes No Yes 4) No<br />
CAM_Focus Mode (Auto/Manual) No No No Yes No Yes Yes 4) No<br />
CAM_Focus One Push Trigger No No No Yes No No Yes 4) No<br />
CAM_Focus Infinity No No No Yes No Yes Yes 4) No<br />
CAM_Focus Near Limit No No No Yes No Yes Yes 4) No<br />
AF Sensitivity Normal/Low No No No Yes Yes Yes Yes 4) No<br />
AF Mode Norm/Interval/Zoom No No No Yes Yes Yes Yes 4) No<br />
AF Activation Time/Interval Setting No No No Yes Yes Yes Yes 4) No<br />
1) DC power is being supplied, but the camera has been turned off by a VISCA command.<br />
2) The period from the time IF Clear is sent, until the Reply Packet is returned.<br />
3) The period from the time DC power is turned on or the camera is turned on via a VISCA command, and the camera subsequently finishes the pan/tilt reset operation and stops at the Home position, until the video signal is<br />
output. Or the period from the time the CAM Power ON command is sent, until Completion is returned.<br />
4) When the menu display is updating, operation is not possible.<br />
White Balance<br />
Mode<br />
Power On<br />
Power Off 1) White balance mode During displaying<br />
IFC 2) Initializing 3)<br />
Command Auto Indoor Outdoor One Push Manual<br />
the menu<br />
Memory Recall<br />
CAM_WB Auto/Indoor/Outdoor/<br />
OnePhshWB/Manual<br />
No No No Yes Yes Yes Yes Yes Yes 4) No<br />
CAM_WB One Push Trigger No No No No No No Yes 5) No Yes 4) No<br />
CAM_WB R(B) Gain<br />
Reset/Up/Down/Direct<br />
No No No No No No No Yes Yes 4) No<br />
1) DC power is being supplied, but the camera has been turned off by a VISCA command.<br />
2) The period from the time IF Clear is sent, until the Reply Packet is returned.<br />
3) The period from the time DC power is turned on or the camera is turned on via a VISCA command, and the camera subsequently finishes the pan/tilt reset operation and stops at the Home position, until the video signal is<br />
output. Or the period from the time the CAM Power ON command is sent, until Completion is returned.<br />
4) When the menu display is updating, operation is not possible.<br />
5) Commands are ignored during a One Push AWB operation.<br />
19
Change language