HOT WATER OUR ELEMENT - Stiebel Eltron

Impressive when it comes to quality, too | The SHW series of
freestanding DHW cylinders with 200, 300 and 400 litres capacity
offer enough backup to heat a whole house.
The sealed DHW heater is made of steel with a special enamel coating
on the inside. Additional corrosion protection is provided by an anticorrosion
rod with signal indicator element.
This makes the SHW ideal for multiple draw-off points. The cylinder is
supplied as standard with a thermometer, signal anode and variable
cold water inlet. Its temperature is infi nitely variable.
Its highly effective insulation keeps heat dissipation to a minimum.
With the option of operating the cylinder with the less expensive
off-peak current, the SHW series of freestanding DHW cylinders are
also ideal as central and economic domestic hot water solutions for
domestic households and commercial use alike. All freestanding DHW
cylinders are easy to retrofi t during renovation work.
SHW 200 – 400 S
Cylinder with 200, 300, 400 l (subject to model)
2.0 – 6.0 kW universal immersion heater
(subject to device and connection type)
Rapid heat-up button
Stand-by consumption loss 1.5 – 2.25 kWh per day (subject to model)
Optional cost-effective off-peak operation
Infi nitely variable temperature control, approx. + 35 °C to + 82 °C
Copper immersion heater elements can be replaced individually
Signal anode
36 | 37