HOT WATER OUR ELEMENT - Stiebel Eltron

WALL MOUNTED WATER HEATERS
DUAL/SINGLE CIRCUIT WATER HEATERS
Model SHZ 30 – 150 LCD electronic comfort
– Type SHZ 30 LCD SHZ 50 LCD SHZ 80 LCD SHZ 100 LCD SHZ 120 LCD SHZ 150 LCD
– Part no. 185452 185453 185454 185455 185456 185457
Application
– Nominal capacity
– For one or more draw-off
l 30 50 80 100 120 150
points (pressure tested)
– For one draw-off point
• • • • • •
(non-pressurised) • • • • • •
Connection details
– Type
– Operating mode
Pressure tested (sealed)
– Dual/single circuit cylinder1) • • • • • •
– Permiss. op. pressure MPa/bar 0.6 / 6
– Mixed water volume of 40 °C2) l
– Stand-by power consumption
59 97 159 198 235 292
at 65 °C /24 h kWh 0.45 0.52 0.66 0.77 0.92 1.05
– Connected load and voltage3) Dual-circuit operation: Single circuit operation: Single heat-up operation:
1/2 kW, 2/2 kW, 1/4 kW, 2/4 kW, 3/4 kW | 1/N/PE ~ 230 V 1 kW, 2 kW, 3 kW, 4 kW | 1/N/PE ~ 230 V 1 kW, 2 kW, 3 kW, 4 kW | 1/N/PE ~ 230 V
1/4 kW, 2/4 kW, 3/4 kW | 2/N/PE ~ 400 V 3 kW, 4 kW | 2/N/PE ~ 400 V 3 kW, 4 kW | 2/N/PE ~ 400 V
1/6 kW, 2/6 kW, 3/6 kW | 3/N/PE ~ 400 V 6 kW | 3/N/PE ~ 400 V 6 kW | 3/N/PE ~ 400 V
– Protection level IP 25 (hoseproof)
– Test symbols VDE / CE
Equipment level
– Steel inner cylinder,
enamel-coated, with prot. anode • • • • • •
– Electronic control unit • • • • • •
– Temperature range °C 20 to 85
– Economy setting °C 40 to 65
– Liquid crystal display • • • • • •
– Impressed current anode • • • • • •
– Colour White
Weight and dimensions
– Dimensions (H x W x D4) ) mm 770 x 410 x 420 740 x 510 x 510 1,050 x 510 x 510 1,050 x 510 x 510 1,210 x 510 x 510 1,445 x 510 x 510
– Wet weight5) kg 53.0 78.0 118.0 140.0 165.0 203.0
Accessories
– Safety valves KV 30, KV 40 for pressure tested, fixtures for non-pressure tested usage (see page 66)
Key
• Available, or yes.
1) Dual-circuit system for reheating during the day, subject to demand.
2) The mixed water volume has a service temperature of 40 °C which is
based on a cold water temperature of 15 °C and a cylinder water
temperature of 65 °C (with respect to the operational state).
3) Regulations vary according to local power supply company; to be
connected only by a qualified electrician – except for units which are
delivered ready to plug in.
4) Including water inlet nozzles (excl. valves).
5) Before installing ensure wall has sufficient load-bearing capacity.
54 | 55