automotive catalogue - AFM
automotive catalogue - AFM
automotive catalogue - AFM
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
APPLICATIONS POWERTRAIN<br />
TECHNOLOGY STAMPING<br />
This manufacturing system for<br />
aluminium’s parts aimed to the car<br />
industry. Starting from coils, it includes<br />
steps for material's preparation,<br />
uncoiling, levelling, embossing and<br />
blank's cutting. These blanks are, then,<br />
stamped in a 600 Tons transfer press.<br />
The embossed aluminium parts are<br />
used, among other applications, for<br />
the thermal isolation of some parts of<br />
the vehicle.<br />
TOWER<br />
RIETER<br />
FAGOR ARRASATE S.COOP.<br />
San Andres, 20 - 20500 MONDRAGON (Guipúzcoa)<br />
Tfno +34 943 719 999 - Fax +34 943 799 677<br />
www.fagorarrasate.com - fagorarrasate@fagorarrasate.com<br />
TRANSFER LINE FOR EMBOSSED ALUMINIUM PARTS (HEAT SHIELDS)<br />
TECHNICAL CHARACTERISTICS<br />
MODEL TSE4-600-3600-1800<br />
Number of connectings rods<br />
Capacity<br />
Capacity from b.d.c.<br />
Bolster and slide area<br />
Stroke<br />
Slide adjustment<br />
Strokes per minute<br />
Main motor power<br />
Shut height on bolster (s.d.a.u.)<br />
REFERENCES<br />
<strong>automotive</strong> <strong>catalogue</strong><br />
4<br />
600 TN<br />
at 12.7 mm = 6.000 KN<br />
3.600 X 1.830<br />
711 mm<br />
254 mm<br />
10-25<br />
75 Kw<br />
1.168 mm<br />
57