automotive catalogue - AFM

APPLICATIONS BODY: OUTER AND EXPOSED PARTS
TECHNOLOGY STAMPING
The manufacture of body panels for the automotive industry requires
the linking of a number of large bed presses to form a production line.
The lead press making the initial form used to be double action design.
However, today new models are being developed around the use of
a high tonnage single action press with a programmable hydraulic
die cushion. Fagor Arrasate is at the forefront of this developing
technology with several successful installations already proven in the
field. Subsequent operations are performed by single action presses.
Automation of the line is achieved by incorporating destacker, inter
press handling (crossbar, robots) and moving bolster for quick die
change.
Fagor Arrasate has signed an exclusive agreement with one of the
world largest robot manufacturer for producing innovative automation
systems for robot press lines: WAVE FLEXIBLE LINE (continuous mode)
GENERAL MOTORS
PSA
FAGOR ARRASATE S.COOP.
San Andres, 20 - 20500 MONDRAGON (Guipúzcoa)
Tfno +34 943 719 999 - Fax +34 943 799 677
www.fagorarrasate.com - fagorarrasate@fagorarrasate.com
LARGE AND X-LARGE TANDEM LINES FOR SKIN PANELS
TECHNICAL CHARACTERISTICS
MODEL LE4-2400-4800-2400
Number of connectings rods
Capacity
Capacity from b.d.c.
Bolster and slide area
Stroke
Slide adjustment
Strokes per minute
Main motor power
Shut height on bolster (s.d.a.u.)
REFERENCES
FORD
4
2400 TN
at 12.5 mm = 24000 KN
4800 X 2400
1100 mm
350 mm
11-20
500 Kw
1350 mm
automotive catalogue
LE4-1000-4800-2400
4
1.000 TN
at 12.7 mm = 10.000 KN
4.800 X 2.400
1.100 mm
350 mm
10-20
160 Kw
1.168 mm
60