automotive catalogue - AFM

These presses are designed to transfer components from stage to
stage within one structure producing completed components in an
automated sequence.
At the heart of the machine is the press rigidity and press throughput
through the transfer system. Fagor Arrasate has designed and
developed its own electronic transfer system using commercially
available components and “state of the art” engineering, it can
be purposed built or adapted for retro-fitting to machines already
in the field. Infinite adjustments through the three axes of movements
provides the optimal curve to reach the maximum parts per minute,
subsequently is a very flexible stamping cell.
Delivery of material to the machine can be directly from coil using
an uncoiler, leveller and pinch rolls or from blanks fed from a
purpose build destacker. Destackers can also be adapted for
retrofitting to machines already in the field.
VOLKSWAGEN
BENTELER
FAGOR ARRASATE S.COOP.
San Andres, 20 - 20500 MONDRAGON (Guipúzcoa)
Tfno +34 943 719 999 - Fax +34 943 799 677
www.fagorarrasate.com - fagorarrasate@fagorarrasate.com
APPLICATIONS BODY: INNER AND STRUCTURAL PARTS, DRIVETRAIN, POWERTRAIN, CHASSIS & FRONT AND REAR AXLE, WHEELS
TECHNOLOGY FORGING, STAMPING
LARGE AND X-LARGE TRANSFER LINES FOR REINFORCEMENT PARTS (HIGH STRENGTH MATERIAL)
TECHNICAL CHARACTERISTICS
MODEL TLE4-3600-7200-2800
Number of connectings rods
Capacity
Capacity from b.d.c.
Bolster and slide area
Stroke
Slide adjustment
Strokes per minute
Main motor power
Shut height on bolster (s.d.a.u.)
REFERENCES
METALSA
automotive catalogue
4
3.600 TN
at 12.7 mm = 36.000 KN
7.200 X 2.800
900 mm
400 mm
8-24
450 Kw
1.400 mm
61