equipment sourcebook - Loctite.ph
equipment sourcebook - Loctite.ph
equipment sourcebook - Loctite.ph
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
DISPENSING Controllers &<br />
Reservoirs<br />
INTEGRATED RESERVOIR CONTROLLERS<br />
LOCTITE ® INTEGRATED SEMI-AUTOMATIC DISPENSER<br />
Item Numbers: 97007, 97010, 97017 and 97020<br />
The <strong>Loctite</strong>® Integrated Semi-Automatic Dispense Systems combine a controller and<br />
reservoir into a single unit. These popular units provide a less complex and more<br />
cost effective dispensing solution when compared to systems with separate<br />
reservoirs and controllers. Combined with the digital timing feature, this unit will<br />
provide precise dispensing control with any <strong>Loctite</strong>® automatic dispense valve or<br />
pneumatic hand held applicator, sold separately. The reservoir is large enough to<br />
accept up to 2 kg bottles, and units can be equipped with low level sensing as<br />
shown in the chart below.<br />
Features:<br />
• Equipped with a 0 to 15 psi, or a 0 to 100 psi<br />
adjustable pressure regulator<br />
• Easy-to-read pressure gauge<br />
• Continuous or timed dispense mode from<br />
0.01 to 99.9 seconds<br />
• Drip funnel for reservoir lid during product changeover<br />
• 97017 and 97020 offer low level sensors, and are<br />
recommended when dispensing cyanoacrylate adhesives<br />
Theory of Operation<br />
The unit is connected to an external pneumatic supply, and<br />
regulates the adjusted dispensing pressure during the<br />
selected dispensing time. A bottle of adhesive is placed<br />
directly into the integrated reservoir, and the reservoir lid is<br />
clamped in place. It is then pressurized using clean, filtered<br />
dry air. Air within the reservoir will push down on the liquid<br />
in the bottle and force it through the product feed line to<br />
the dispensing valve.<br />
TECHNICAL SPECIFICATIONS<br />
Power Supply<br />
90/260 VAC; 47/63 Hz<br />
Air Input<br />
Minimum 30 psi<br />
Air Output<br />
97007: 0 to 100 psi 97010: 0 to 15 psi<br />
97017: 0 to 100 psi 97020: 0 to 15 psi<br />
Low Level Sensing<br />
97007: No 97010: No<br />
97017: Yes 97020: Yes<br />
Product Viscosity > 3,000 cP 0 to 3,000 cP<br />
Dimensions<br />
13.8" H x 14.5" W x 9.2" D<br />
Reservoir Dimensions<br />
4.75" diameter x 9.75" H<br />
Weight<br />
16.5 lbs. (7.5 kg)<br />
Used to Dispense<br />
Gel Adhesives, Instant Adhesives, Light Cure/Acrylics,<br />
Retaining Compounds, Threadlockers<br />
Package<br />
Types & Sizes<br />
Parts Included<br />
Additional<br />
Information<br />
250 ml bottle / 1 lb. bottle / 1 L bottle<br />
2 kg bottle / 200 g squeeze tube<br />
(1) Power Cord (1) Integrated Semi-Automatic Dispenser<br />
(1) Manual (1) Foot Switch (3) Drip Cups<br />
For Spare Parts and Accessories, see pages 84-85.<br />
For Dispense Tips, see pages 80-81.<br />
For additional information and the full line of <strong>equipment</strong>, visit www.<strong>equipment</strong>.loctite.com.<br />
19