equipment sourcebook - Loctite.ph
equipment sourcebook - Loctite.ph
equipment sourcebook - Loctite.ph
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
DISPENSING<br />
Hand Held Hot<br />
Melt Applicators<br />
1 3 ⁄ 4 INCH SPRAYPAC ® AND POLYSHOT APPLICATORS<br />
LOCTITE ® HYSOL 175-AIR / 175-AIR-HT<br />
PNEUMATIC APPLICATORS<br />
Item Numbers: 98036 and 98040<br />
The <strong>Loctite</strong>® Hysol 175-AIR and 175-AIR-HT (High Temperature for<br />
Polyamides) are industrial grade, electrically heated, hand held<br />
pneumatic hot melt applicators. These high capacity dispensers are<br />
rugged and designed for heavy duty work. The dispense quantity and<br />
timing are pneumatically controlled with the ergonomic trigger<br />
mechanism, greatly minimizing operator fatigue.<br />
Features:<br />
• Lightweight, well balanced, and ergonomically<br />
designed for operator comfort and application control<br />
• Pneumatically powered actuation to reduce operator fatigue<br />
• High melt rate for maximum output<br />
• Completely enclosed heater housing for maximum safety<br />
• Fixed precision thermostat temperature<br />
control for consistent heating<br />
Theory of Operation<br />
The dispense rate is controlled by<br />
the air pressure, and the<br />
timing is controlled by the<br />
trigger mechanism.<br />
Pneumatically powered<br />
dispensing reduces<br />
operator fatigue.<br />
TECHNICAL SPECIFICATIONS<br />
PRODUCT <strong>Loctite</strong> ® Hysol 175-AIR <strong>Loctite</strong> ® Hysol 175-AIR-HT<br />
Item Numbers 98036 98040<br />
Voltage<br />
110/120 VAC; 50/60 Hz<br />
Required<br />
Utilities<br />
Power<br />
500 watts<br />
Air Input<br />
45 to 100 psi<br />
Nominal Stick Diameter<br />
1 3 ⁄4" Polyshot <br />
Size<br />
2.6" W x 12.1" L x 9.5" H<br />
Weight<br />
3.89 lbs.<br />
Power Cord Length 10 feet (120")<br />
Maximum Extension Cord<br />
65 feet<br />
Warm-Up Time<br />
10 minutes<br />
Dispense Power<br />
Electric<br />
Dispense Melt Rate<br />
8.8 lbs./hour<br />
Dispense Temperature 195°C 215°C<br />
Applicator Adhesive Capacity<br />
0.125 lbs.<br />
Wire Cross-Section<br />
16 a.w.g. minimum<br />
Hot Melt Chemistry EVA hot melt sticks Polyamide hot melts sticks<br />
Parts Included<br />
(1) Hysol 175-AIR or Hysol 175-AIR-HT Applicator<br />
(1) Plastic Stand (1) Valve Body Air Line Adapter<br />
(1) Standard Nozzle (1) Manual<br />
Additional Information For Hot Melt Nozzles and Accessories, see page 49.<br />
Additional Accessories Sold Separately<br />
98042 –<br />
<strong>Loctite</strong> ® Hot<br />
Melt Bench<br />
Mount Kit<br />
98043 – <strong>Loctite</strong> ® Hot<br />
Melt Pneumatic Timer<br />
985397 –<br />
<strong>Loctite</strong> ® Air<br />
Line Filter,<br />
Regulator, Gauge<br />
LOCTITE ® HYSOL 175-SPRAY / 175-SPRAY-HT PNEUMATIC APPLICATORS<br />
Item Numbers: 98037 and 98041<br />
The <strong>Loctite</strong>® Hysol 175-SPRAY and 175-SPRAY-HT (High<br />
Temperature for Polyamides) are industrial grade, electrically<br />
heated, hand held, pneumatic hot melt applicators. Fine to coarse<br />
spray pattern control is possible with a simple air rate adjustment<br />
knob. These high capacity dispensers are rugged and designed for<br />
heavy duty work. The dispense quantity and timing are<br />
pneumatically controlled with the ergonomic trigger mechanism,<br />
greatly minimizing operator fatigue.<br />
Features:<br />
• Adjustable flow control for tailoring the spray pattern<br />
• Patented spray technology for small or large spray pattern<br />
• Automatic end-of-cycle purge to prevent nozzle clogging<br />
• Lightweight, well balanced, and ergonomically<br />
designed for operator comfort and application control<br />
• Pneumatically powered actuation to reduce operator fatigue<br />
• High melt rate for maximum output<br />
• Completely enclosed heater housing for maximum safety<br />
• Fixed precision thermostat temperature control<br />
for consistent heating<br />
Theory of Operation<br />
By using the air flow control, the spray<br />
pattern can be varied from a narrow to<br />
a wide spiral pattern. The dispense<br />
rate is controlled by the air<br />
pressure, and the timing is<br />
controlled with the trigger<br />
mechanism. Pneumatically<br />
powered dispensing<br />
reduces operator fatigue.<br />
TECHNICAL SPECIFICATIONS<br />
PRODUCT Hysol 175-SPRAY Hysol 175-SPRAY-HT<br />
Item Numbers 98037 98041<br />
Voltage<br />
110/120 VA; 50/60 Hz<br />
Required<br />
Utilities<br />
Power<br />
500 watts<br />
Air Input<br />
45 to 100 psi<br />
Spray Pattern<br />
Ultra-wide spray nozzle: 1.5" minimum / 6" maximum<br />
Standard medium spray nozzle: 1.25" minimum / 5" maximum<br />
Narrow spray nozzle: 0.5" minimum / 1.25" maximum<br />
Nominal Stick Diameter<br />
1 3 ⁄4" SprayPac ® Sticks<br />
Size<br />
2.6" W x 12.1" L x 9.5" H<br />
Weight<br />
4 lbs.<br />
Power Cord Length 10 feet (120")<br />
Maximum Extension Cord<br />
65 feet<br />
Warm-Up Time<br />
10 minutes<br />
Dispense Power<br />
Electric<br />
Dispense Melt Rate<br />
8 lbs./hour<br />
Dispense Temperature 195°C 215°C<br />
Applicator Adhesive Capacity<br />
0.125 lbs.<br />
Wire Cross-Section<br />
16 a.w.g. minimum<br />
Hot Melt Chemistry EVA Spray hot melt sticks Polyamide Spray hot melt sticks<br />
Parts Included<br />
(1) Hysol 175-SPRAY or Hysol 175-SPRAY-HT Applicator<br />
(1) Plastic Stand (1) Valve Body Air Line Adapter<br />
(1) Manual (1) Standard Wide Spray Nozzle<br />
Additional Information For Hot Melt Nozzles and Accessories, see page 49.<br />
Additional Accessories Sold Separately<br />
985397 – <strong>Loctite</strong> ® Air Line Filter, Regulator, Gauge<br />
46<br />
For additional information and the full line of <strong>equipment</strong>, visit www.<strong>equipment</strong>.loctite.com.