CoaguChek® XS System

5. Identify the Target Area Find the target area on the
test strip.
You can dose the target area
by bringing the patient’s finger
to the top of the test strip or
by bringing the meter to the
patient’s finger so that the side
of the test strip touches the
blood drop.
6. Apply the Blood Within 15 seconds of
sticking the fingertip, apply
the blood to the target area of
the test strip—either from the
top or side of the test strip.
Hold the blood drop to the
test strip until you hear a beep.
The flashing blood drop symbol
disappears.
Do not add more blood to
the test strip. Do not touch
the test strip.
The result appears in about
1 minute.
22