E-MU 0404 PCIe Digital Audio System OpMan - English - Version 2.10

REAL TIME CONTROLLERS
ASSIGNABLE KEYS
SEQUENCER
PRESET
SAMPLE
EMULATOR
1
2
3
4
LEVEL
EXIT ENTER
PAGE
PRESET SELECT
5
6
7
8
9
RETURN
0 .
3 - PCIe Card & Interfaces
The E-MU 0404 PCIe Card
The inputs can be connected to any line level stereo signal from keyboards, CD-players,
cassette decks, etc. Use 1/4” to RCA adapter cables to connect to consumer audio gear.
Analog Input Connections
Analog
Breakout
Cable
Audio Component
Mixer/Preamp
In
L
Electronic Keyboard
Microphone
(must be pre-amped)
R
Instr. Preamp
Electric Instrument
Digital Breakout Cable
Connect to
Analog
Breakout Cable
Connect to
Digital
Breakout Cable
ANALOG
DIGITAL
S/PDIF Digital Audio Input & Output
RCA phono jacks are the standard coaxial connectors
used for S/PDIF (Sony/Philips Digital InterFace) connections.
A single jack carries two channels of digital audio.
The E-MU 0404 receives digital audio data with word
lengths of up to 24-bits. Data is always transmitted at 24-
bits.
S/PDIF digital I/O allows you to receive and/ or transmit
of digital data from external digital devices such as a DAT,
external analog-to-digital converters or external signal
processors equipped with digital inputs and outputs.
S/PDIF can also be transmitted and received via the
TOSLINK optical connectors on the Digital Breakout
Cable. Optical connections have certain advantages such
as immunity to electrical interference and ground loops.
Make sure to use high quality glass fiber light pipes for
connections longer than 1.5 meters.
The optical S/PDIF and RCA coaxial S/PDIF Inputs
cannot be used simultaneously, however BOTH
S/PDIF Outputs are available simultaneously (carrying the
same signal). See System Settings.
The S/PDIF out can be configured as either Professional
or Consumer mode in the Session Settings menu. The
14 Creative Professional