ENSX-K SERIES Technical Drawing SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM COPYRIGHT © 2013 CORDYNE, INC. All Rights Reserved. 105
ENSX-K SERIES Non- Combination, FVNR, NEMA Configuration Enclosure Ratings: NEMA 7/9 Mfg: Killark 1/4 HP - 200 HP (230V) Standard Features: • NEMA rated Contactor with Adjustable Thermal Overload (Class10). • Oversized Control Power Transformer (<strong>opt</strong>ional). • External Machined Flange Joint Design. • Units are assembled, pre-wired and ready to go straight out of the box. • Integral Cast Mounting Feet. • Units come <strong>standard</strong> with Hinged Covers. • S.S. 316 Captive Quick Thread Cover Bolts (<strong>opt</strong>ional). • Ground Lug Package. • Steel mounting pan. • Enclosures cast from Copper-Free Aluminum – Max 0.25% Copper Content. • Aluminum, Stainless Steel Shot or Sandblasted Natural Finish. • Enclosures suitable for NEMA 4X Applications. • Cast aluminum and Stainless Steel Hinge. OVERALL MOUNTING NEMA SIZE 1 2 3 4 5 6 HP 0.25* HP 0.5* 0.75* 1* 1.5* 2* 3* 5* 7.5* 10 15 20 25 30 40 50 60 75 100 125 150 200 FULL LOAD AMPS @ OVERALL OVERALL 230V/3PHASE/60HZ DIMENSIONS MOUNTING FULL LOAD AMPS @ DIMENSIONS 1.4 20”H x 12.5”W x 9.125”D 18.375”H x 5”W OVERALL MOUNTING 2.2 20”H x 12.5”W x 9.125”D 18.375”H x 5”W 3.2 20”H x 12.5”W x 9.125”D 18.375”H x 5”W 4.2 20”H x 12.5”W x 9.125”D 18.375”H x 5”W 6.0 20”H x 12.5”W x 9.125”D 18.375”H x 5”W 6.8 20”H x 12.5”W x 9.125”D 18.375”H x 5”W 9.6 20”H x 12.5”W x 9.125”D 18.375”H x 5”W 15.2 20”H x 12.5”W x 9.125”D 18.375”H x 5”W 22 20”H x 12.5”W x 9.125”D 18.375”H x 5”W 28 20”H x 12.5”W x 9.125”D 18.375”H x 5”W 42 20”H x 12.5”W x 9.125”D 18.375”H x 5”W 54 26.25”H x 12.5”W x 10.75”D 24.625”H x 5”W 68 26.25”H x 12.5”W x 10.75”D 24.625”H x 5”W 80 26.25”H x 12.5”W x 10.75”D 24.625”H x 5”W 104 34.25”H x 16.5”W x 11.5”D 32.625”H x 9”W 130 34.25”H x 16.5”W x 11.5”D 32.625”H x 9”W 154 34.25”H x 16.5”W x 11.5”D 31.56”H x 27.56”W 192 41.25”H x 29.25”W x 14.40”D 31.56”H x 27.56”W 248 41.25”H x 29.25”W x 14.40”D 31.56”H x 27.56”W 312 41.25”H x 29.25”W x 14.40”D 31.56”H x 27.56”W 360 41.25”H x 29.25”W x 14.40”D 31.56”H x 27.56”W 480 41.25”H x 29.25”W x 14.40”D 31.56”H x 27.56”W BASE PART NUMBER LIST PRICE BASE CH-ENSX-K-0.25-230-000000 PART NUMBER LIST PRICE$3,581.00 CH-ENSX-K-0.5-230-000000 $3,581.00 CH-ENSX-K-0.75-230-000000 $3,581.00 CH-ENSX-K-1-230-000000 $3,581.00 CH-ENSX-K-1.5-230-000000 $3,581.00 CH-ENSX-K-2-230-000000 $3,581.00 CH-ENSX-K-3-230-000000 $3,581.00 CH-ENSX-K-5-230-000000 $3,642.00 CH-ENSX-K-7.5-230-000000 $3,642.00 CH-ENSX-K-10-230-000000 $4,045.00 CH-ENSX-K-15-230-000000 $4,045.00 CH-ENSX-K-20-230-000000 $6,505.00 CH-ENSX-K-25-230-000000 $6,505.00 CH-ENSX-K-30-230-000000 $6,505.00 CH-ENSX-K-40-230-000000 $8,565.00 CH-ENSX-K-50-230-000000 $8,565.00 CH-ENSX-K-60-230-000000 $30,911.00 CH-ENSX-K-75-230-000000 $30,911.00 CH-ENSX-K-100-230-000000 $30,911.00 CH-ENSX-K-125-230-000000 $40,515.00 CH-ENSX-K-150-230-000000 $40,515.00 CH-ENSX-K-200-230-000000 $40,515.00 * If CPT <strong>opt</strong>ion is NOT chosen for 0.25 to 15 HP, enclosure overall size will be 18”H X 11”W X 9.125”D (mounting dimensions 16.375”H X 3.625”W) and a $150 deduction can be taken from the corresponding list price. Units are shipped with overload relays sized for <strong>standard</strong> NEMA rated motors with a service factor of 1.15, running at normal speeds and with Full Load Amp (FLA) rating as shown in the table on page 5. For non-<strong>standard</strong> motors or motors with service factors less than 1.15, contact CORDYNE with the motor nameplate rating so the overload relay can be properly sized. Non-Standard Options: Many additional Options such as Control Relays for “Dry Circuit” control from PLC’s, Timers, Remote Operating Stations, etc., are available. Contact CORDYNE for those special requirements. We can make any custom modification or addition to suit your application. UL 508A & UL 1203 Certification Optional. Available upon request. Please contact factory for pricing information. 106 SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM COPYRIGHT © 2013 CORDYNE, INC. All Rights Reserved.
Change language