ES4XS SERIES Technical Drawing SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM COPYRIGHT © 2013 CORDYNE, INC. All Rights Reserved. 85
ES4XS SERIES Non-Combination, FVNR, IEC Configuration Enclosure Ratings: NEMA 4X Stainless Steel 1/4 HP - 250 HP (230V) Standard Features: • Heavy Duty, Corrosion Resistant • 14 gauge Stainless Steel Enclosure with brushed finish. • All components are mounted to enclosure’s back-pan. • The enclosure is rated for NEMA 4X applications. • IEC contactor with adjustable thermal overload (Class 10). • NEMA, UL, CSA & IEC rated components only. • A wide range of <strong>standard</strong> <strong>opt</strong>ions make it possible to adapt a “<strong>standard</strong>” control to your particular needs. • Oversized Control Power Transformer (<strong>opt</strong>ional). • Units are assembled, pre-wired and ready to go straight out of the box. HP FULL LOAD AMPS @ 230V/3PHASE/60HZ OVERALL DIMENSIONS OVERALL MOUNTING BASE PART NUMBER LIST PRICE 0.25 1.4 12”H x 12”W x 6”D 12.75”H x 10”W CH-ES4XS-0.25-230-000000 $1,313.00 0.5 2.2 12”H x 12”W x 6”D 12.75”H x 10”W CH-ES4XS-0.5-230-000000 $1,313.00 0.75 3.2 12”H x 12”W x 6”D 12.75”H x 10”W CH-ES4XS-0.75-230-000000 $1,313.00 1 4.2 12”H x 12”W x 6”D 12.75”H x 10”W CH-ES4XS-1-230-000000 $1,313.00 1.5 6.0 12”H x 12”W x 6”D 12.75”H x 10”W CH-ES4XS-1.5-230-000000 $1,313.00 2 6.8 12”H x 12”W x 6”D 12.75”H x 10”W CH-ES4XS-2-230-000000 $1,313.00 3 9.6 12”H x 12”W x 6”D 12.75”H x 10”W CH-ES4XS-3-230-000000 $1,324.00 5 15.2 12”H x 12”W x 6”D 12.75”H x 10”W CH-ES4XS-5-230-000000 $1,378.00 7.5 22 12”H x 12”W x 6”D 12.75”H x 10”W CH-ES4XS-7.5-230-000000 $1,414.00 10 28 12”H x 12”W x 6”D 12.75”H x 10”W CH-ES4XS-10-230-000000 $1,483.00 15 42 12”H x 12”W x 6”D 12.75”H x 10”W CH-ES4XS-15-230-000000 $1,573.00 20 54 14”H x 12”W x 6”D 14.75”H x 10”W CH-ES4XS-20-230-000000 $1,681.00 25 68 14”H x 12”W x 6”D 14.75”H x 10”W CH-ES4XS-25-230-000000 $1,702.00 30 80 14”H x 12”W x 6”D 14.75”H x 10”W CH-ES4XS-30-230-000000 $1,878.00 40 104 16”H x 14”W x 10”D 16.75”H x 12”W CH-ES4XS-40-230-000000 $2,381.00 50 130 16”H x 14”W x 10”D 16.75”H x 12”W CH-ES4XS-50-230-000000 $2,517.00 60 154 24”H x 24”W x 12”D 25.25”H x 18”W CH-ES4XS-60-230-000000 $4,535.00 75 192 24”H x 24”W x 12”D 25.25”H x 18”W CH-ES4XS-75-230-000000 $6,000.00 100 248 24”H x 24”W x 12”D 25.25”H x 18”W CH-ES4XS-100-230-000000 $6,797.00 125 312 24”H x 24”W x 12”D 25.25”H x 18”W CH-ES4XS-125-230-000000 $7,452.00 150 360 24”H x 24”W x 12”D 25.25”H x 18”W CH-ES4XS-150-230-000000 $8,102.00 200 480 24”H x 24”W x 12”D 25.25”H x 18”W CH-ES4XS-200-230-000000 $11,483.00 250 602 30”H x 24”W x 16”D 31.25”H x 18”W CH-ES4XS-250-230-000000 $15,658.00 Units are shipped with overload relays sized for <strong>standard</strong> NEMA rated motors with a service factor of 1.15, running at normal speeds and with Full Load Amp (FLA) rating as shown in the table on page 5. For non-<strong>standard</strong> motors or motors with service factors less than 1.15, contact CORDYNE with the motor nameplate rating so the overload relay can be properly sized. Non-Standard Options: Many additional Options such as Control Relays for “Dry Circuit” control from PLC’s, Timers, Remote Operating Stations, etc., are available. Contact CORDYNE for those special requirements. We can make any custom modification or addition to suit your application. UL 508A & UL 1203 Certification Optional. Available upon request. Please contact factory for pricing information. 86 SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM COPYRIGHT © 2013 CORDYNE, INC. All Rights Reserved.