Cordyne_standard_ms_catalog_06122013-opt. - Cordyne, Inc.

CS4 SERIES
Combination, FVNR, IEC Configuration
Enclosure Ratings: NEMA 4, 3R, 12, 1
1/4 HP - 500 HP (575V)
Standard Features:
• Motor Starters are in stock and ready to go.
• Heavy duty enclosure is painted steel with ANSI 61 gray powder coating.
• All components are mounted to enclosure back pan.
• Enclosure is rated for NEMA 4, 3R, 13, 12, 1 applications.
• IEC Contactor with adjustable thermal overload (Class 10).
• NEMA, UL, CSA & IEC rated components only.
• A wide range of standard options make it possible to adapt a “standard” control
to your particular needs.
• Oversized Control Power Transformer (optional).
• Molded case circuit breaker with through-the-door handle.
• Units are assembled, pre-wired and ready to go straight out of the box.
HP
FULL LOAD AMPS @
575V/3PHASE/50HZ
OVERALL
DIMENSIONS
OVERALL
MOUNTING
BASE PART NUMBER
LIST PRICE
0.25
0.64
14”H x 12”W x 8”D
14.75”H x 10”W
CH-CS4-0.25-575-000000
$1,306.00
0.5
0.9
14”H x 12”W x 8”D
14.75”H x 10”W
CH-CS4-0.5-575-000000
$1,306.00
0.75
1.3
14”H x 12”W x 8”D
14.75”H x 10”W
CH-CS4-0.75-575-000000
$1,306.00
1
1.7
14”H x 12”W x 8”D
14.75”H x 10”W
CH-CS4-1-575-000000
$1,306.00
1.5
2.4
14”H x 12”W x 8”D
14.75”H x 10”W
CH-CS4-1.5-575-000000
$1,306.00
2
2.7
14”H x 12”W x 8”D
14.75”H x 10”W
CH-CS4-2-575-000000
$1,306.00
3
3.9
14”H x 12”W x 8”D
14.75”H x 10”W
CH-CS4-3-575-000000
$1,306.00
5
6.1
14”H x 12”W x 8”D
14.75”H x 10”W
CH-CS4-5-575-000000
$1,306.00
7.5
9
14”H x 12”W x 8”D
14.75”H x 10”W
CH-CS4-7.5-575-000000
$1,319.00
10
11
14”H x 12”W x 8”D
14.75”H x 10”W
CH-CS4-10-575-000000
$1,346.00
15
17
14”H x 12”W x 8”D
14.75”H x 10”W
CH-CS4-15-575-000000
$1,376.00
20
22
14”H x 12”W x 8”D
14.75”H x 10”W
CH-CS4-20-575-000000
$1,417.00
25
27
14”H x 12”W x 8”D
14.75”H x 10”W
CH-CS4-25-575-000000
$1,599.00
30
32
16”H x 14”W x 8”D
16.75”H x 12”W
CH-CS4-30-575-000000
$1,700.00
40
41
16”H x 14”W x 8”D
16.75”H x 12”W
CH-CS4-40-575-000000
$1,718.00
50
52
16”H x 14”W x 8”D
16.75”H x 12”W
CH-CS4-50-575-000000
$1,748.00
60
62
16”H x 14”W x 8”D
16.75”H x 12”W
CH-CS4-60-575-000000
$2,126.00
75
77
16”H x 14”W x 8”D
16.75”H x 12”W
CH-CS4-75-575-000000
$2,336.00
100
99
16”H x 14”W x 8”D
16.75”H x 12”W
CH-CS4-100-575-000000
$2,910.00
125 1
125
24”H x 24”W x 12”D
25.5”H x 22.5”W
CH-CS4-125-575-000010
$3,604.00
150 1
144
24”H x 24”W x 12”D
25.5”H x 22.5”W
CH-CS4-150-575-000010
$4,244.00
200 1
192
24”H x 24”W x 12”D
25.5”H x 22.5”W
CH-CS4-200-575-000010
$5,708.00
250 1
242
36”H x 30”W x 16”D
37.5”H x 28.5”W
CH-CS4-250-575-000010
$8,861.00
300 1
289
36”H x 30”W x 16”D
37.5”H x 28.5”W
CH-CS4-300-575-000010
$9,516.00
350 1
336
36”H x 30”W x 16”D
37.5”H x 28.5”W
CH-CS4-350-575-000010
$10,166.00
400 1
382
36”H x 30”W x 16”D
37.5”H x 28.5”W
CH-CS4-400-575-000010
$12,267.00
450 1
412
48”H x 36”W x 16”D
49.5”H x 34.5”W
CH-CS4-450-575-000010
$16,138.00
500 1
472
48”H x 36”W x 16”D
49.5”H x 34.5”W
CH-CS4-500-575-000010
$16,138.00
1 For Starters 575V, 125 HP - 500 HP, Option E must be selected.
Units are shipped with overload relays sized for standard NEMA rated motors with a service factor of 1.15, running at normal speeds and with
Full Load Amp (FLA) rating as shown in the table on page 5. For non-standard motors or motors with service factors less than 1.15, contact
CORDYNE with the motor nameplate rating so the overload relay can be properly sized.
Non-Standard Options: Many additional Options such as Control Relays for “Dry Circuit” control from PLC’s, Timers, Remote Operating
Stations, etc., are available. Contact CORDYNE for those special requirements. We can make any custom modification or addition to suit
your application.
26
UL 508A & UL 1203 Certification Optional. Available upon request.
Please contact factory for pricing information.
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC. All Rights Reserved.