Cordyne_standard_ms_catalog_06122013-opt. - Cordyne, Inc.

ENSX-K SERIES
Non- Combination, FVNR, NEMA Configuration
Enclosure Ratings: NEMA 7/9 Mfg: Killark
1/4 HP - 400 HP (575V)
Standard Features:
• NEMA rated Contactor with Adjustable Thermal Overload (Class10).
• Oversized Control Power Transformer (optional).
• External Machined Flange Joint Design.
• Units are assembled, pre-wired and ready to go straight out of the box.
• Integral Cast Mounting Feet.
• Units come standard with Hinged Covers.
• S.S. 316 Captive Quick Thread Cover Bolts (optional).
• Ground Lug Package.
• Steel mounting pan.
• Enclosures cast from Copper-Free Aluminum – Max 0.25% Copper Content.
• Aluminum, Stainless Steel Shot or Sandblasted Natural Finish.
• Enclosures suitable for NEMA 4X Applications.
• Cast aluminum and Stainless Steel Hinge.
OVERALL
MOUNTING
NEMA
SIZE
1
2
3
4
5
6
HP
0.25* HP
0.5*
0.75*
1*
1.5*
2*
3*
5*
7.5*
10*
15
20
25
30
40
50
60
75
100
125
150
200
250
300
350
400
FULL LOAD AMPS @
OVERALL
OVERALL
575V/3PHASE/60HZ
DIMENSIONS
MOUNTING
FULL LOAD AMPS @
DIMENSIONS
0.64 20”H x 12.5”W x 9.125”D 18.375”H x 5”W
OVERALL MOUNTING
0.9 20”H x 12.5”W x 9.125”D 18.375”H x 5”W
1.3 20”H x 12.5”W x 9.125”D 18.375”H x 5”W
1.7 20”H x 12.5”W x 9.125”D 18.375”H x 5”W
2.4 20”H x 12.5”W x 9.125”D 18.375”H x 5”W
2.7 20”H x 12.5”W x 9.125”D 18.375”H x 5”W
3.9 20”H x 12.5”W x 9.125”D 18.375”H x 5”W
6.1 20”H x 12.5”W x 9.125”D 18.375”H x 5”W
9
20”H x 12.5”W x 9.125”D 18.375”H x 5”W
11 20”H x 12.5”W x 9.125”D 18.375”H x 5”W
17 20”H x 12.5”W x 9.125”D 18.375”H x 5”W
22 20”H x 12.5”W x 9.125”D 18.375”H x 5”W
27 20”H x 12.5”W x 9.125”D 18.375”H x 5”W
32 26.25”H x 12.5”W x 10.75”D 24.625”H x 5”W
41 26.25”H x 12.5”W x 10.75”D 24.625”H x 5”W
52 26.25”H x 12.5”W x 10.75”D 24.625”H x 5”W
62 34.25”H x 16.5”W x 11.5”D 32.625”H x 9”W
77 34.25”H x 16.5”W x 11.5”D 32.625”H x 9”W
99 34.25”H x 16.5”W x 11.5”D 32.625”H x 9”W
125 41.25”H x 29.25”W x 14.40”D 31.56”H x 27.56”W
144 41.25”H x 29.25”W x 14.40”D 31.56”H x 27.56”W
192 41.25”H x 29.25”W x 14.40”D 31.56”H x 27.56”W
242 41.25”H x 29.25”W x 14.40”D 31.56”H x 27.56”W
289 41.25”H x 29.25”W x 14.40”D 31.56”H x 27.56”W
336 41.25”H x 29.25”W x 14.40”D 31.56”H x 27.56”W
382 41.25”H x 29.25”W x 14.40”D 31.56”H x 27.56”W
BASE PART NUMBER
LIST PRICE
BASE CH-ENSX-K-0.25-575-000000
PART NUMBER LIST PRICE $3,581.00
CH-ENSX-K-0.5-575-000000 $3,581.00
CH-ENSX-K-0.75-575-000000 $3,581.00
CH-ENSX-K-1-575-000000 $3,581.00
CH-ENSX-K-1.5-575-000000 $3,581.00
CH-ENSX-K-2-575-000000 $3,581.00
CH-ENSX-K-3-575-000000 $3,581.00
CH-ENSX-K-5-575-000000 $3,581.00
CH-ENSX-K-7.5-575-000000 $3,642.00
CH-ENSX-K-10-575-000000 $3,642.00
CH-ENSX-K-15-575-000000 $4,045.00
CH-ENSX-K-20-575-000000 $4,045.00
CH-ENSX-K-25-575-000000 $4,045.00
CH-ENSX-K-30-575-000000 $6,505.00
CH-ENSX-K-40-575-000000 $6,505.00
CH-ENSX-K-50-575-000000 $6,505.00
CH-ENSX-K-60-575-000000 $8,565.00
CH-ENSX-K-75-575-000000 $8,565.00
CH-ENSX-K-100-575-000000 $8,565.00
CH-ENSX-K-125-575-000000 $30,911.00
CH-ENSX-K-150-575-000000 $30,911.00
CH-ENSX-K-200-575-000000 $30,911.00
CH-ENSX-K-250-575-000000 $40,515.00
CH-ENSX-K-300-575-000000 $40,515.00
CH-ENSX-K-350-575-000000 $40,515.00
CH-ENSX-K-400-575-000000 $40,515.00
* If CPT option is NOT chosen for 0.25 to 15 HP, enclosure overall size will be 18”H X 11”W X 9.125”D (mounting dimensions 16.375”H X 3.625”W) and a
$150 deduction can be taken from the corresponding list price.
Units are shipped with overload relays sized for standard NEMA rated motors with a service factor of 1.15, running at normal speeds and with
Full Load Amp (FLA) rating as shown in the table on page 5. For non-standard motors or motors with service factors less than 1.15, contact
CORDYNE with the motor nameplate rating so the overload relay can be properly sized.
Non-Standard Options: Many additional Options such as Control Relays for “Dry Circuit” control from PLC’s, Timers, Remote Operating
Stations, etc., are available. Contact CORDYNE for those special requirements. We can make any custom modification or addition to suit
your application.
UL 508A & UL 1203 Certification Optional. Available upon request.
Please contact factory for pricing information.
110
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC. All Rights Reserved.