Cordyne_standard_ms_catalog_06122013-opt. - Cordyne, Inc.

CS4XP SERIES
Combination, FVNR, IEC Configuration
Enclosure Ratings: NEMA 4X Polyester
1/4 HP - 200 HP (575V)
Standard Features:
• Heavy Duty, Corrosion Resistant.
• Molded Fiberglass Enclosure with gray injection coloring.
• All components are mounted to enclosure’s back-pan.
• The enclosure is rated for NEMA 4X applications.
• IEC contactor with adjustable thermal overload (Class 10).
• NEMA, UL, CSA & IEC rated components only.
• A wide range of standard options make it possible to adapt a “standard”
control to your particular needs.
• Oversized Control Power Transformer (optional).
• Molded case circuit breaker with through-the door 4X handle.
• Units are assembled, pre-wired and ready to go straight out of the box.
HP
FULL LOAD AMPS @
575V/3PHASE/60HZ
OVERALL
DIMENSIONS
OVERALL
MOUNTING
BASE PART NUMBER
LIST PRICE
0.25
0.64
16.27”H x 14.40”W x 8.13”D
17.19”H x 13.01”W
CH-CS4XP-0.25-575-000000
$1,386.00
0.5
0.9
16.27”H x 14.40”W x 8.13”D
17.19”H x 13.01”W
CH-CS4XP-0.5-575-000000
$1,386.00
0.75
1.3
16.27”H x 14.40”W x 8.13”D
17.19”H x 13.01”W
CH-CS4XP-0.75-575-000000
$1,386.00
1
1.7
16.27”H x 14.40”W x 8.13”D
17.19”H x 13.01”W
CH-CS4XP-1-575-000000
$1,386.00
1.5
2.4
16.27”H x 14.40”W x 8.13”D
17.19”H x 13.01”W
CH-CS4XP-1.5-575-000000
$1,386.00
2
2.7
16.27”H x 14.40”W x 8.13”D
17.19”H x 13.01”W
CH-CS4XP-2-575-000000
$1,386.00
3
3.9
16.27”H x 14.40”W x 8.13”D
17.19”H x 13.01”W
CH-CS4XP-3-575-000000
$1,386.00
5
6.1
16.27”H x 14.40”W x 8.13”D
17.19”H x 13.01”W
CH-CS4XP-5-575-000000
$1,386.00
7.5
9
16.27”H x 14.40”W x 8.13”D
17.19”H x 13.01”W
CH-CS4XP-7.5-575-000000
$1,398.00
10
11
16.27”H x 14.40”W x 8.13”D
17.19”H x 13.01”W
CH-CS4XP-10-575-000000
$1,425.00
15
17
16.27”H x 14.40”W x 8.13”D
17.19”H x 13.01”W
CH-CS4XP-15-575-000000
$1,456.00
20
22
16.27”H x 14.40”W x 8.13”D
17.19”H x 13.01”W
CH-CS4XP-20-575-000000
$1,496.00
25
27
16.27”H x 14.40”W x 8.13”D
17.19”H x 13.01”W
CH-CS4XP-25-575-000000
$1,679.00
30
32
18.40”H x 16.40”W x 8.13”D
19.28”H x 14.97”W
CH-CS4XP-30-575-000000
$1,866.00
40
41
18.40”H x 16.40”W x 8.13”D
19.28”H x 14.97”W
CH-CS4XP-40-575-000000
$1,884.00
50
52
18.40”H x 16.40”W x 8.13”D
19.28”H x 14.97”W
CH-CS4XP-50-575-000000
$1,914.00
60
62
18.40”H x 16.40”W x 8.13”D
19.28”H x 14.97”W
CH-CS4XP-60-575-000000
$2,292.00
75
77
18.40”H x 16.40”W x 8.13”D
19.28”H x 14.97”W
CH-CS4XP-75-575-000000
$2,502.00
100
99
18.40”H x 16.40”W x 8.13”D
19.28”H x 14.97”W
CH-CS4XP-100-575-000000
$3,076.00
125
1
125
24”H x 24”W x 10.13”D
25.06”H x 22.75”W
CH-CS4XP-125-575-000010
$3,988.00
150
1
144
24”H x 24”W x 10.13”D
25.06”H x 22.75”W
CH-CS4XP-150-575-000010
$3,683.00
200
1
192
24”H x 24”W x 10.13”D
25.06”H x 22.75”W
CH-CS4XP-200-575-000010
$5,147.00
1 For Starters 575V, 125 HP - 500 HP, Option E must be selected.
Units are shipped with overload relays sized for standard NEMA rated motors with a service factor of 1.15, running at normal speeds and with
Full Load Amp (FLA) rating as shown in the table on page 5. For non-standard motors or motors with service factors less than 1.15, contact
CORDYNE with the motor nameplate rating so the overload relay can be properly sized.
Non-Standard Options: Many additional Options such as Control Relays for “Dry Circuit” control from PLC’s, Timers, Remote Operating
Stations, etc., are available. Contact CORDYNE for those special requirements. We can make any custom modification or addition to suit
your application.
UL 508A & UL 1203 Certification Optional. Available upon request.
Please contact factory for pricing information.
82
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC. All Rights Reserved.