Cordyne_standard_ms_catalog_06122013-opt. - Cordyne, Inc.
Cordyne_standard_ms_catalog_06122013-opt. - Cordyne, Inc.
Cordyne_standard_ms_catalog_06122013-opt. - Cordyne, Inc.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
ES4 SERIES<br />
FVNR Non- Combination Motor Starters 1/4 HP – 500 HP<br />
Heavy duty enclosure which is painted steel with ANSI 61 gray powder coating. All<br />
components are mounted to enclosure’s back pan. Enclosure is rated for NEMA 4, 3R, 13,<br />
12, 1 applications. IEC Contactor with adjustable thermal overload (Class 10). NEMA, UL,<br />
CSA & IEC rated components only. A wide range of <strong>standard</strong> <strong>opt</strong>ions make it possible to<br />
adapt a “<strong>standard</strong>” control to your particular needs. Oversized Control Power Transformer<br />
(<strong>opt</strong>ional). Units are assembled, pre-wired and ready to go straight out of the box.<br />
Technical Data and Specifications<br />
ENCLOSURE<br />
Applications<br />
• Designed to enclose electrical and/or electronic equipment and<br />
protect against harsh, industrial environments.<br />
Standards<br />
• UL 508 Type 3R, 4, 12 and 13<br />
• CSA Type 3R, 4, 12 and 13<br />
Complies with:<br />
• NEMA Type 3R, 4, 12 and 13<br />
• IEC 529, IP66<br />
Construction<br />
• Body and cover are formed from 16 gauge steel.<br />
• Smooth, continuously welded sea<strong>ms</strong> without knockouts, cutouts,<br />
or holes.<br />
• Formed lip on enclosure to exclude flowing liquids and<br />
contaminants.<br />
• 14 gauge welded brackets provide for enclosure mounting.<br />
• Continuously hinged cover has 304 stainless steel hinges and<br />
provides 180º opening.<br />
• Door latches feature the added safety of quarter turn slot requiring<br />
use of tool for opening.<br />
• Quarter turn latches formed from black zinc diecast.<br />
• Oil resistant gaskets are permanently secured.<br />
• Models larger than 4”x4” include a removable 14 gauge<br />
galvanized inner panel.<br />
Finish<br />
• Cover and enclosure are finished in recoatable smooth ANSI/ASA<br />
61 gray powder coating.<br />
• Inner panels are unpainted galvanized steel, (50-200HP) and<br />
above are painted white.<br />
CONTACTOR<br />
Standards<br />
• Compact frame sizes from 7A to 250A<br />
• Common accessories for all contactor sizes<br />
• Panel or 35mm DIN rail mountable<br />
• Simple to exchange coils<br />
• Finger-touch protection<br />
• Front and side mountable auxiliary contact blocks<br />
• Replaceable main contacts for entire line<br />
• Positively driven contacts and operations<br />
• Front and side mounted auxiliary contacts<br />
• Wide coil voltage selection<br />
• Designed to perform over 1 million electrical and 10 million<br />
mechanical operations<br />
Certifications:<br />
• cULus<br />
• IEC 60947<br />
• CE<br />
• Test/Reset button<br />
• Selectable Manual or Automatic Reset<br />
• Separate mounting capability via screws or DIN rail<br />
CONTROL POWER TRANSFORMER<br />
Standards<br />
• Control Power Transformers meet or exceeds the<br />
<strong>standard</strong>s established by UL, CSA, IRC, ANSI, NEMA.<br />
Standard File No. VA Size<br />
UL (ANSI/UL 506) E50394<br />
All Units<br />
CSA (C22-2 No. 66) LR3902<br />
All Units<br />
IEC 989<br />
NEMA (ST-1)<br />
All Molded Units<br />
All Units<br />
Core & Coils<br />
• High quality, high permeability silicon steel laminations.<br />
• All-welded construction.<br />
• Computer designed copper wound coils with <strong>opt</strong>imum turns ratio.<br />
Finger Safe Terminal Covers<br />
• Finger safe terminal covers for both fused and un-fused terminals, in<br />
a clear, see through finish, are available for all molded transformer<br />
series units.<br />
Standard Secondary Fuse Clips<br />
• Each transformer has a single secondary and comes with a factory<br />
installed secondary fuse kit. (fuses are not included.)<br />
• Accommodates 13/32” x 1-1/2” Midget Fuse.<br />
PUSH BUTTONS<br />
Standards: IEC/EN 60947-5-1, VDE 0660,<br />
NFC63140, UL 508, UL 50, CENELEC EN50007<br />
Degree of Protection: IP66 (IEC/EN60529)<br />
UL Ratings: Type 1,2,3,3R,3S,4,4X,5,12,12K e 13<br />
Contacts Resistance: ≤ 25mΩ (IEC/EN 60255)<br />
Electrical Shock Protection: Class II<br />
Temperature Range: -25ºC to 70ºC<br />
Vibration Resistance (IEC/EN 6068-2-6): 16g with frequency<br />
range from 40 to 500HZ and max shifting 0.75mm (peak-to-peak)<br />
FUSES<br />
• Time Delay, Rejection Type Fast Acting; Branch Circuit Fuse<br />
Class CC, Class CC- Rejection Feature<br />
Voltage Rating: 600 Volts AC or Less<br />
Interrupting Rating: 200,000A RMS Sym<br />
Agency Approvals: Std. 248-4, Class CC, UL Listed, Guide JDDZ,<br />
File E4273, CSA Certified, Class 1422-01, File 53787<br />
OVERLOAD<br />
Standards<br />
• Phase failure/unbalance sensitivity<br />
• Ambient temperature compensation<br />
• Isolated N.C. “Trip” and N.O. “Alarm” auxiliary contacts<br />
• Class 10 tripping characteristics<br />
• “Trip Free” design<br />
• Field adjustable trip current setting<br />
8<br />
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE<br />
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM<br />
COPYRIGHT © 2013 CORDYNE, INC. All Rights Reserved.
Change language