Cordyne_standard_ms_catalog_06122013-opt. - Cordyne, Inc.

ENS4 SERIES
Non-Combination, FVNR, NEMA Configuration
Enclosure Ratings: NEMA 4, 3R, 12, 1
1/4 HP - 500 HP (460V)
Standard Features:
• Motor Starters are in stock and ready to go.
• Heavy duty enclosure which is painted steel with ANSI 61 gray powder coating.
• All components are mounted to enclosure back pan.
• Enclosure is rated for NEMA 4, 3R, 13, 12, 1 applications.
• NEMA rated non-reversing magnetic motor starter.
• Heavy duty enclosure for a variety of applications/NEMA ratings.
• Reset pushbutton is standard on all units.
• A wide range of standard options make it possible to adapt a “standard” control
to your particular needs.
• Oversized Control Power Transformer (optional).
• Three leg protection – overload heaters (included standard-sized to rated chart amps).
• All components are UL, CSA rated.
• Units are assembled, pre-wired and ready to go straight out of the box.
NEMA
SIZE
1
2
3
4
5
6
7
HP
0.25
HP
0.5
0.75
1
1.5
2
3
5
7.5
10
15
20
25
30
40
50
60
75
100
125
150
200
250
300
350
400
450
500
FULL LOAD AMPS @ OVERALL
OVERALL
460V/3PHASE/60HZ DIMENSIONS
MOUNTING
FULL LOAD AMPS @
DIMENSIONS
0.7
12”H x 12”W x 6”D
OVERALL MOUNTING 12.75”H x 10”W
1.1
12”H x 12”W x 6”D
12.75”H x 10”W
1.6
12”H x 12”W x 6”D
12.75”H x 10”W
2.1
12”H x 12”W x 6”D
12.75”H x 10”W
3
12”H x 12”W x 6”D
12.75”H x 10”W
3.4
12”H x 12”W x 6”D
12.75”H x 10”W
4.8
12”H x 12”W x 6”D
12.75”H x 10”W
7.6
12”H x 12”W x 6”D
12.75”H x 10”W
11
12”H x 12”W x 6”D
12.75”H x 10”W
14
12”H x 12”W x 6”D
12.75”H x 10”W
21
16”H x 14”W x 8”D
16.75”H x 12”W
27
16”H x 14”W x 8”D
16.75”H x 12”W
34
16”H x 14”W x 8”D
16.75”H x 12”W
40
20”H x 16”W x 10”D
21.5”H x 14.5”W
52
20”H x 16”W x 10”D
21.5”H x 14.5”W
65
20”H x 16”W x 10”D
21.5”H x 14.5”W
77
20”H x 16”W x 10”D
21.5”H x 14.5”W
96
20”H x 16”W x 10”D
21.5”H x 14.5”W
124
20”H x 16”W x 10”D
21.5”H x 14.5”W
156
30”H x 24”W x 12”D
31.5”H x 22.5”W
180
30”H x 24”W x 12”D
31.5”H x 22.5”W
240
30”H x 24”W x 12”D
31.5”H x 22.5”W
302
36”H x 30”W x 16”D
37.5”H x 28.5”W
361
36”H x 30”W x 16”D
37.5”H x 28.5”W
414
36”H x 30”W x 16”D
37.5”H x 28.5”W
477
36”H x 30”W x 16”D
37.5”H x 28.5”W
515
36”H x 30”W x 16”D
37.5”H x 28.5”W
590
48”H x 36”W x 16”D
49.5”H x 34.5”W
BASE PART NUMBER LIST PRICE
BASE PART CH-ENS4-0.25-460-000000
NUMBER LIST PRICE$895.00
CH-ENS4-0.5-460-000000 $895.00
CH-ENS4-0.75-460-000000 $895.00
CH-ENS4-1-460-000000 $895.00
CH-ENS4-1.5-460-000000 $895.00
CH-ENS4-2-460-000000 $895.00
CH-ENS4-3-460-000000 $895.00
CH-ENS4-5-460-000000 $895.00
CH-ENS4-7.5-460-000000 $956.00
CH-ENS4-10-460-000000 $956.00
CH-ENS4-15-460-000000 $1,481.00
CH-ENS4-20-460-000000 $1,481.00
CH-ENS4-25-460-000000 $1,481.00
CH-ENS4-30-460-000000 $2,344.00
CH-ENS4-40-460-000000 $2,344.00
CH-ENS4-50-460-000000 $2,344.00
CH-ENS4-60-460-000000 $4,203.00
CH-ENS4-75-460-000000 $4,203.00
CH-ENS4-100-460-000000 $4,203.00
CH-ENS4-125-460-000000 $9,547.00
CH-ENS4-150-460-000000 $9,547.00
CH-ENS4-200-460-000000 $9,547.00
CH-ENS4-250-460-000000 $19,594.00
CH-ENS4-300-460-000000 $19,594.00
CH-ENS4-350-460-000000 $19,594.00
CH-ENS4-400-460-000000 $19,594.00
CH-ENS4-450-460-000000 Call Cordyne
CH-ENS4-500-460-000000 Call Cordyne
Units are shipped with overload relays sized for standard NEMA rated motors with a service factor of 1.15, running at normal speeds and with
Full Load Amp (FLA) rating as shown in the table on page 5. For non-standard motors or motors with service factors less than 1.15, contact
CORDYNE with the motor nameplate rating so the overload relay can be properly sized.
Non-Standard Options: Many additional Options such as Control Relays for “Dry Circuit” control from PLC’s, Timers, Remote Operating
Stations, etc., are available. Contact CORDYNE for those special requirements. We can make any custom modification or addition to suit
your application.
UL 508A & UL 1203 Certification Optional. Available upon request.
Please contact factory for pricing information.
32
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC. All Rights Reserved.