HDL-64E S2 manual_Rev A - Velodyne Lidar
HDL-64E S2 manual_Rev A - Velodyne Lidar
HDL-64E S2 manual_Rev A - Velodyne Lidar
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Installation Overview<br />
Front/Back Mounting<br />
The <strong>HDL</strong>-<strong>64E</strong> <strong>S2</strong> base provides two mounting options: side mount and top mount. See<br />
Figure 2 for front/back mounting options, Figure 3 for side/side mounting, and Figure 4 for<br />
top mounting instructions. The sensor can be mounted at any angle from 0 to 90 degrees with<br />
respect to the base of the sensor.<br />
Two M8-1.25 x 12mm<br />
deep mounting points.<br />
(Four per side, for a<br />
total of 8.)<br />
Mounting<br />
Base<br />
Figure 2. Front and back <strong>HDL</strong> mounting illustration.<br />
See Figure 2. This figure shows the <strong>HDL</strong>-<strong>64E</strong> <strong>S2</strong>’s base plate screw locations with threaded<br />
inserts for standard M8 hardware.<br />
.w ww.velodyne.com/lidar <strong>HDL</strong>-<strong>64E</strong> <strong>S2</strong> User’s Manual<br />
3
Change language