E1.10 2009 Product Catalog (pdf) - Lincoln Electric

RECOMMENDED GENERAL OPTIONS
TIG
TIG MODULE
TIG Module
Portable, high frequency unit
with gas valve for TIG welding.
Rated at 300 amps/60%
duty cycle.
Order K930-2
Control Cable
Connects TIG Module to
power source.
Order K936-1 for 9-pin to
14-pin
Order K936-3 for 9-pin to
6-pin plus 115V
Order K936-4 for 9-pin to
115V
Control Cable Extension
Allows the TIG Module to be
operated at distances up to
200 ft. (61 m) from the power
source. Available in 45 ft.
(13.7 m) sections.
Order K937-45
Amptrol ® Adapter Kit
Adapts Amptrol’s 6-pin
MS-type plug connection to
terminal strip on power
source.
Order K843
Foot Amptrol ®
Provides 25 ft. (7.6 m) of
remote output control for
TIG welding. (6-pin plug
connection).
Order K870
Hand Amptrol ®
Provides 25 ft. (7.6 m) of
remote current control for
TIG welding. (6-pin plug
connection). Velcro straps
secure it to the torch.
Order K963-3 (One size fits
all Pro-Torch TIG Torches.)
TIG WATER-COOLED
OPTIONS
Includes
Ultra-Flex
Torch!
Includes
Ultra-Flex
Torch!
TIG-MATE STARTER
PACKS
TIG-Mate 9 Air-Cooled
TIG Torch Starter Pack
Get everything you need for
TIG welding in one complete
easy-to-order kit packaged in
its own portable carrying
case. Includes: PTA-9 Ultra-
Flex torch, gas lens parts kit,
Harris ® flowmeter/regulator,
Twist-Mate adapter, gas
hose, work clamp and cable.
Order K2413-1
TIG-Mate 17V Air-Cooled
TIG Torch Starter Pack
Get everything you need for
TIG welding in one complete
easy-to-order kit packaged in
its own portable carrying
case. Includes: PTA-17V Ultra-
Flex torch, parts kit, Harris ®
flowmeter/regulator, 10 ft.
(3.0 m) gas hose, and work
clamp and cable.
Order K2265-1
Docking Kit
Allows you to “dock” the TIG
Module on top of a flatroofed
power source, or any
other flat surface measuring
at least 10 x 15 in. (254 x 381
mm). Includes a latch and provisions
for a user-supplied
padlock to lock the TIG
Module in place.
Order K939-1
Contactor Kit
Installs in the K930-2 TIG
Module for use with welders
without a contactor. Makes
the TIG torch electrode electrically
“cold” until the
Amptrol ® is activated.
Order K938-1
TIG REMOTE CONTROLS
Arc Start Switch
May be used in place of the
foot or hand Amptrol ® . Comes
with a 25 ft. (7.6 m) cable and
6 pin plug connector.
Attaches to the TIG torch for
convenient finger control to
start and stop the weld cycle
at the current set on the
machine.
Order K814
Cool Arc ® 35 Water Cooler
Cooler plugs directly into the
Invertec ® V310-T AC/DC for
digital communication and
input power. This “smart
cooler” monitors pressure
and temperature and adjusts
its speed accordingly.
Order K2630-1
Cool Arc ® 40 Water Cooler
Reliable and affordable water
cooler for water-cooled MIG,
TIG, or plasma cutting applications.
Order K1813-1 for
115/1/50/60
Order K2187-1 for
220-240/1/50/60
Water Cooler Hoses
(CGA to CGA)
For 5/8" LH CGA fitting applications
at both cooler and
wire feeder. Kit contains two
25 ft. hoses with 5/8" left
hand CGA fittings on both
ends of hose.
Order K1859-2 for
Precision TIG ® 275,
Precision TIG ® 375
Includes
Ultra-Flex
Torch!
TIG-Mate 17 Air-Cooled
TIG Torch Starter Pack
Get everything you need for
TIG welding in one complete
easy-to-order kit packaged in
its own portable carrying
case. Includes: PTA-17 Ultra-
Flex torch, parts kit, Harris ®
flowmeter/regulator, 10 ft.
(3.0 m) gas hose, Twist-Mate
adapter, and work clamp and
cable.
Order K2266-1
TIG-Mate 20
Water-Cooled TIG Torch
Starter Pack
Get everything you need for
TIG welding in one complete
easy-to-order kit packaged in
its own portable carrying
case. Includes: PTW-20 torch,
parts kit, Harris ® flowmeter/
regulator, 10 ft. (3.0 m) gas
hose, Twist-Mate adapter,
work clamp and cable and
10 ft. (3.0 m) water hose.
Order K2267-1
www.lincolnelectric.com
153