From Raglan Jacket to Coat with Hood - My Label 3D Fashion ...

Hood markings and shape
Extend the top frame line approx. 7cm to
the right.
From here, close the hood frame.
Make another marking to the left of the
reference line at about 5 cm.
Drag a diagonal marking approx. 5.5 cm
long from the left-hand corner.
Draw a final vertical marking 1cm outside
of the left frame margin.
Draw a harmonious hood shape from the
top right-hand corner to the back neckbase
line.
Close the hood shape from the front
right-hand corner up to the front neckbase
line.
Add 1.6cm seam allowance all around on
the hood and cut out the hood.