Download Full Product Catalog - Durex Industries

166
INTEGRATED TRANSMITTER RTD ASSEMBLY
INDUSTRIAL TEMPERATURE SENSOR WITH M12 MICRO-CONNECTOR
Compression fitting
CODE TABLE 1: Calibrated Temperature Range
05
0˚C to 50˚C (32/122˚F)
10
0˚C to 100˚C (32/212˚F)
15
0˚C to 150˚C (32/302˚F)
20
0˚C to 200˚C (32/392˚F)
55 -50˚C to 50˚C (-58/122˚F)
51 -50˚C to 150˚C (-58/302˚F)
52 -50˚C to 200˚C (-58/392˚F)
XX Custom Temperature Range
XX = Specify Temperature Range in Description
Integrated Transmitter RTD Assemblies are factory
calibrated to an accuracy of ± 0.25% of span or better.
CODE
TABLE 2: Output
LP 4-20 mA loop, upscale burnout (std.)
LD 4-20 mA loop, downscale burnout
CODE
TABLE 3: Probe Diameter “D”
B
1/8”
C
3/16”
D
1/4”
F
3/8”
H
1/2”
Other diameters available. Consult factory.
CODE
TABLE 4: Probe Material
S Stainless Steel 316
Other materials available. Consult factory.
CODE
TABLE 5: Probe Length “L”
In 0.1 inch increments
---
Ex: 065 = 6.5” long
Ex: 120 = 12.0” long
PART NUMBER SEQUENCE i.e. IT25-05-LP-B-S-065-N20-N-M12-A2
Enter CODE From Tables
“L”
“C”
1.0” Std.
IT25 assemblies can be
utilized in similar applications
as the IT22, but the IT25
allows for quick disconnections.
IT25 devices are effective in
laboratory test equipment,
hydraulic power units, skids,
generators, and mobile
equipment.
4.0”
To order the IT25with a 90° bend,
add suffix “B” after the model number.
Ex: IT25B
1.0”
“L”
Stop collar*
2.5” Std. “E”
* No stop collar option, “C” = N00
Stop collar recommended for temperature above 100˚C
IT25
M12 Micro-Connector
Extension Cable
TABLE 9: Extension Cable “E”
None
Straight, 2 meters
Straight, 5 meters
Right angle, 2 meters
Right angle, 5 meters
IT25 - Table 1 - Table 2 - Table 3 - Table 4 - Table 5 - Table 6 - Table 7 - Table 8 -
Model Number Temp Output Probe Probe Probe Extension Fitting Connector
Range
Diameter Material Length Length Type Type
190 Detroit Street • Cary, Illinois 60013 • Phone: 847-639-5600 • Fax: 847-639-2199 • Web: www.durexindustries.com • TOLL FREE: 800-762-3468
CODE
N _ _
CODE
N
S**S
CODE
M12
CODE
N
A2
A5
B2
B5
TABLE 6: Extension Length “C”
In 0.1” increments (1.0” Std.)
Ex: N20 = 2.0” long
TABLE 7: Fitting Type
None
Compression Fitting
Ferrule material:
S = Stainless steel* B = Brass* T = Teflon
*Not readjustable with metal ferrule
Process NPT size:
** 18 = 1/8” NPT
38 = 3/8” NPT
34 = 3/4” NPT
Fitting material:
S = Stainless steel
14 = 1/4“ NPT
12 = 1/2“ NPT
44 = 1.0” NPT
B = Brass
Ex: T14B = Teflon ferrule, 1/4” NPT, Brass fitting
TABLE 8: Connector Type
M12 Micro-Connector 5 pin male
receptacle, nickel plated brass
Table 9
Extension
Cable