Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
611630 Drill-breaker combination hammer “PIONJÄR 120”<br />
Powerful, reliable and versatile drill-breaker:<br />
• Breaking, cutting and drilling capabilities - Ideal for tie<br />
tamping, drilling, anchoring, asphalt and concrete cutting<br />
• Petrol driven, no need for cables, power packs, hoses or<br />
compressors<br />
• Easy to transport, use, maintain and service - Cuts capital,<br />
running, transport and storage costs<br />
The Pionjär drill/ breaker is delivered in a special protective<br />
wooden case which is easy to transport. The case includes one<br />
34 x 400 mm drill steel, and one 45 x 400 mm concrete chisel.<br />
Technical Data:<br />
Impact rate: 2600 blows/ min<br />
Drilling capacity: 300 mm/ min (in granite,<br />
34 mm drill)<br />
Max. drilling depth: 6 m (in granite, 34 mm drill)<br />
Tool shank: 22 x 108 mm<br />
Engine type: 185 cc single cylinder, two-stroke<br />
Cooling system: Forced air<br />
Starter system: Recoil starter<br />
Recommended fuel: >90 octane (unleaded or leaded)<br />
Recommended oil: two-stroke oil<br />
Fuel mix: 1:25 (4 %)<br />
Fuel tank capacity: 1,5 litres<br />
Fuel consumption (average): 1,4 l/ h<br />
Weight: 27 kg.<br />
Recommended Accessories:<br />
611631 Flat head chisel<br />
45 mm wide, 340 mm long. Weight: 1,4 kg.<br />
611632 Pointed chisel<br />
350 mm long. Weight: 1,4 kg.<br />
611634 Pointed spade<br />
120 mm wide, 330 mm long. Weight: 3,2 kg.<br />
613000 Disaster flame cutting equipment<br />
Certified as to DIN 14800:2005. The advanced technology, easy<br />
handling and safety down to the last detail are the result of more<br />
than fifty years experience in the construction of special disaster<br />
flame cutting equipment. The disaster flame cutting equipment is<br />
extremely easy to transport, safe to use, ready for immediate use<br />
for example und suitable for any terrain. Disaster flame cutting<br />
equipment comes complete with metal-tube chassis, with:<br />
• 5 l acetylene cylinder<br />
• 5 l oxygen cylinder<br />
• acetylene pressure reducing valve with caps<br />
• oxygen pressure reducing valve with caps<br />
• hose assembly complete with check valves<br />
• torch handle RISTA, robust construction, shaft diameter 18 mm<br />
• cutting insert RISTA, for cutting material gauges up to 100 mm<br />
• pressure reducing valve spanner size SW 30/32<br />
• sheet-steel box with: spare heating- and cutting nozzles,<br />
• spanner, gas lighter, 2 nylon safety goggles, orifice cleaning needles.<br />
Technical data:<br />
Cylinder capacity: acetylene 5 l / 0,75 m 3<br />
oxygen 5 l / 1 m 3<br />
Flame temperature 3100 °C<br />
Dimensions: 670 x 420 x 370 mm<br />
Weight: 37 kg.<br />
<strong>TECHNICAL</strong> <strong>EQUIPMENT</strong> 281<br />
611630<br />
613000<br />
Hammers<br />
9