TECHNICAL EQUIPMENT - Resansil

More documents

Recommendations

Info

328 9 Submersible Pumps The difference between the submersible pumps and the all-purpose pumps is obvious at first glance, as no separate suction hose or suction basket are needed on the submersible pumps. Submersed in the liquid to be pumped, the submersible pump can be operated either upright or on its side. Thanks to the series flatsuction device, the liquid can be pumped off down to a remaining depth of only 5 mm. And when we claim that the submersible pumps are also exceptionally robust, we can prove it — their special sliding-ring seal makes them completely safe to run dry. This type of seal makes it possible to dispense with an oil-chamber. Unlike other makes of pump, then, there is no need to check or change the oil here. Yet more safety and reliability is provided by the plasticembedded motor winding. If the fluid being pumped should penetrate the motor compartment, no danger and no great damage results. One very important fact is that not only the cable but also the entire pump is designed to be oil-proof. And because e.g. floods do not always choose to happen in places where there are 3-phase AC Type (acc. to DIN 1944) at delivery height (bar) (1 bar = 10mWG) T 6 L UWP 4-1 660 0 560 0.5 400 1.0 160 1.5 0 1.8 T 8 800 0 690 0.5 500 1.0 210 1.5 0 1.8 T 12 UWP 8-1 1300 0 1150 0.5 870 1.0 440 1.5 0 2.0 T 16 1600 0 1400 0.5 1060 1.0 600 1.5 0 2.1 T 20 UWP 15-1 2200 0 1980 0.5 1520 1.0 850 1.5 0 2.1 Voltage (V) 230 400 400 400 400 Output kW P up kW P down 1.6 1.2 2.0 1.5 Rated current (A) 8.1 3.8 5.5 6.5 9.3 Grain passage (Δ mm) 8 15 20 m H0 7 RN –F.G. 4 x 1.5 mm 2 5 x 1,5 mm 2 5 x 2,5 mm 2 Δ x height x max. proj. 20 x 50 x23 26 x 56 x 39 26 x 57 x 44 Weight w/o cable (kg) 18 19 35 37 39 Weight w/o cable (kg) 24 23 24 42 47 Without Coupling Order No. Coupling system Storz Order No. Coupling system British Standard Order No. Coupling system NH Order No. BSP thread 2 1 /2" male 933000 Storz B 2 1 /2" 933010 BS 336 2 1 /2" female 933013 NH 1 1 /2" male 933012 Recommended Accessories: 933060 Floating switch for T 6 L Weight: 1,6 kg. BSP thread 2 1 /2" male 933019 Storz B 2 1 /2" 933020 BS 336 2 1 /2" female 933021 NH 2 1 /2" male 933022 3.0 2.4 BSP thread 2 1 /2" male 933028 Storz B 2 1 /2" 933030 BS 336 2 1 /2" female 933031 NH 2 1 /2" male 933032 933070 Floating switch for T 8, T 12, T 16 and T 20 Weight: 2,8 kg. 3.7 3.0 BSP thread 4" male 93304001 Storz A 4" 933040 connection sockets, our model T 6 L runs on 230 V AC, i.e. is quite happy with a normal household plug socket. Furthermore, because building sites and disaster clean-up sites are not always noted for the cleanness of the water found on them, the pumps have been designed in such a way that — depending on the model — solids of up to 20 mm diameter will neither block nor damage the pump. If the pump should run dry for a time, this does not matter to it either. The particular advantage of this pump lies in its extremely low weight in comparison with its exceptionally high power. A novel electronic rotation-direction controller prevents the larger submersible pumps rotating in the wrong direction. This does away with the need for checking the direction of rotation and for switching over or reconnecting the supply lead. In addition, the electronic system is equipped with temperature sensors for monitoring the motor. In the event of a phase failure, under voltage or over temperature, the electronic system switches off the pump automatically. As soon as the operating conditions have returned to normal, it automatically switches it back on again. 5.3 4.5 BSP thread 4" male 93304501 Storz A 4" 933045 933010 933020 933030 933040/933045 delivery hose Pump with floating switch
933076 Sewage pump “ATP 20“ frame version 400 V Application area: The pump is adapted for pumping clean water, waste water and sewage water with solid material of large grain passage (Ø 80mm) and long fibrous suspended water without protective screen. The pump can be used in standing or lying direction. Single channel impeller pump, made of seawater-resistant aluminium alloy in conformity with DIN EN 1706, impeller made of high quality cast iron, screws of stainless steel. A-Storz coupling on input- and output-side, well dimensioned motor dehydration, resistant mechanical shaft seals, pump and motor without oil chamber, dry-running safe, electrical cable 20m long H0 7RN-F 4G1,5 and plug type CEE 5-polar. Motor: 3-phase a.c. motor 400V/50Hz, 3~, 4,9A P1 = 2,9 kW, P2 = 2,3 kW 1450 min-1 Flow: 2300 l/min at 3 m, height (max.): 14 m. Automatic rotating direction facility. Grain passage (Ø 80mm, coupling Storz A) Dimensions: L x W x H 510 x 360 x 580mm (ATP 20 R Frame-version) Weight: 49 kg (frame version incl. plug and 20m cable). 933100 Waste water pump “ATP 10 R“ 400 V Application area: The pump is adapted for pumping clean water, waste water and sewage water with solid material of large grain passage (Ø 65mm) and long fibrous suspended mater without protective screen. The pump can be used in standing or lying direction. Single channel impeller pump, made of seawater-resistant aluminium alloy in conformity with DIN EN 1706, impeller made of high quality cast iron in conformity with DIN EN 1561, screws of stainless steel. B-Storz coupling on input- and output-side, well dimensioned motor wear out resistant mechanical shaft seals, pump and motor without oil chamber, dry-running safe, electrical cable 20 m long H0 7RN-F 4G1,5 and plug type CEE 5-polar with control of direction of rotation and phase-change. Motor: Three-phase a.c. motor 400V/50Hz, 3~, 3,6 A, P1 = 2,0 kW, P2 = 1,5 kW 2900 min-1 Flow: 1200 l/min, height (max.): 14 m. Automatic rotating direction facility. Pump: Submersible Sewage Pump for pumping of clean water, waste water and sewage water with solid material of large grain passage (with B-coupling Ø 65 mm) Dimensions: H x Ø x W 440 x 260 x 410mm Weight: 28 kg (frame version incl. plug and 20 m cable). 933200 Waste water pump “ATP 10 RL“ 230 V Application area: The pump is adapted for pumping clean water, waste water and sewage water with solid material of large grain passage (Ø 65mm) and long fibrous suspended mater without protective screen. The pump can be used in standing or lying direction. Single channel impeller pump, made of seawater-resistant aluminium alloy in conformity with DIN EN 1706, impeller made of high qualtity cast iron in conformity with DIN EN 1561, screws of stainless steel. B-Storz coupling on input- and output-side, well dimensioned motor (shedded with artificial resin), wearout resistant mechanical shaft seals, pump and motor without oilchamber, dry-running safe, electrical cable 20 m long H0 7RN-F 4G1,5 and Schuko type plug IP 44. Motor: 1-phase a.c. motor 230V/50Hz, 1~, 8,4 A, P1 = 1,3 kW, P2 = 1,8 kW 2900 min-1. Flow: 1000 l/min, height (max.): 11 m. Pump: Submersible Sewage Pump for pumping of clean water, waste water and sewage water with solid material of large grain passage (with B-coupling Ø 65 mm) Dimensions: H x Ø x W 410 x 230 x 560mm Weight: 27 kg. <strong>TECHNICAL</strong> <strong>EQUIPMENT</strong> 329 Submersible Pumps 933076 933100 933200 9
Page 1 and 2:
Technical equipmenT 9
Page 3 and 4:
600400 Toolbox with contents Comes
Page 5 and 6:
Pairs of electrician’s gloves Fiv
Page 7 and 8:
Pike Designed for tearing down wood
Page 9 and 10:
282300 Metal fire broom For beating
Page 11 and 12:
604500 Door opening tool set Consis
Page 13 and 14:
HUSQVARNA CHAIN SAWS Husqvarna chai
Page 15 and 16:
STIHL CHAIN SAW STIHL chain saw mod
Page 17 and 18:
Personal protection gear STIHL’S
Page 19 and 20: Recommended Accessories: Power cutt
Page 21 and 22: DRILLS 611300 Two-speed impact dril
Page 23 and 24: 611630 Drill-breaker combination ha
Page 25 and 26: 628000 Cable pull 3,2 t with casing
Page 27 and 28: Shackle Certified as to DIN 82101:2
Page 29 and 30: HOISTING BELTS: TECHNICAL EQUIPMENT
Page 31 and 32: HYDRAULIC RESCUE TOOLS - WEBER New
Page 33 and 34: 645220S WEBER-Spreader SP 50 XL DIN
Page 35 and 36: 645030S WEBER-Cutter Type S 140-26
Page 37 and 38: 645321S WEBER-Combitool VARIO Type
Page 39 and 40: WEBER - Rescue Cylinders, double ac
Page 41 and 42: WEBER- Hydraulic power units Type T
Page 43 and 44: WEBER Hose reels, extension hoses a
Page 45 and 46: Mobile rescue tools with integrated
Page 47 and 48: 645548 WEBER stabilisation kit STAB
Page 49 and 50: LUKAS Spreader 645710S Multifunctio
Page 51 and 52: LUKAS Cutters 645780S Mini Cutter S
Page 53 and 54: Combi tools 645784S High Performanc
Page 55 and 56: Standard Rams 645800S Standard ram
Page 57 and 58: Super Compact Mobile Power Packs 64
Page 59 and 60: Toolholders for motor pumps with DI
Page 61 and 62: Cutter- and Door Opener Sets 646000
Page 63 and 64: Air Bag safe LUKAS Air Bag Safe - t
Page 65 and 66: LIFTING BAGS - VETTER Vetter Liftin
Page 67 and 68: 647370 Rescue set 1 bar Especially
Page 69: Lifting Bags - Accessories Airsourc
Page 73 and 74: MULTI PURPOSE PUMPS The TUP portabl
Page 75: ACCESSORIES FOR VEHICLES Petrol can
show all

TECHNICAL EQUIPMENT - Resansil

Create successful ePaper yourself

Delete template?

Save as template?